Several different versions of the Mixing and Discharge Auger Buckets are available. All mixing and discharge buckets and discharge only buckets will discharge the material out of the bucket using two multi-link chutes (included). All the models except the asphalt bucket (which has a metal auger), have an auger with rubber flighting which seals the discharge opening allowing transport of bulk materials including cement without loss of material. Buckets designated as mixing and discharge buckets have extra paddles on the auger shaft for mixing of the materials; mixing is done by reversing the direction of the hydraulic flow turning the auger backwards. Buckets designated as discharge buckets do not have the extra paddles on the auger and will not mix materials nearly as well when reversing the auger, so if you are distributing materials such as cement that needs mixing before distribution, then you need the mixing bucket models. These buckets will distribute concrete, sand, washed gravel (3/4 inches maximum), agricultural grains, and wildlife feeds. Buckets are available in discharge only models and mixing/discharge models with heavy service hydraulic motors for mixing and/or discharge of heavy or dry materials, as well as a model with discharge auger and heavy service high temperature motor for use with asphault (asphalt model has metal auger).
Skid steer loader mounted, hydraulic motor powered auger buckets with just a discharge auger or with a discharge and mixing auger, depending upon the model
Auger buckets designated as mixing augers have extra paddles on the rubber flighted auger shaft so that when you are in mixing mode and operate the auger in the reverse direction, the bucket effectively keeps the material mixed until you are ready to discharge the loader by reversing the direction of the auger rotation and auger the material down the discharge chute.
Auger buckets designated as discharge buckets do not have the extra paddles of the mixing auger, and when you reverse the motor direction it will not mix the material nearly as well.
The buckets have a standard capacity of 1/2 yard which is 22 of the 80 lb. bags of premix concrete, optional hopper extension is available to boost capacity to 3/4 yard (33 bags of premix concrete weighing 80 lbs. each).
Buckets have accurate and controlled discharge, 1/2 yard in 50 seconds
Horizontal steel auger with Eaton hydraulic motor drive
Replaceable protective rubber flighting (on all models except asphalt bucket) prevents blinding of course material
Augers with rubber flighting form good seal at discharge opening to prevent leaking of material when materials are being transported (either with auger off or with auger running backwards in mixing mode)
All models except the asphalt bucket have auger shafts with rubber flighting. The asphalt auger bucket has an auger shaft with metal flighting.
Attaches to skid steer and tractor loaders having universial skid steer quick attach compatable bucket connections on the loader arms
Quick attach mounting frame on both sides of bucket allows discharge of material to either left or right side
Buckets are self-loading from loose piles (turn bucket downward and scoop in material)
Buckets give you excellent operator visibility
7 ft. hoses with flat faced couplers included
Unit includes two multi-linked discharge chutes (24 and 36 inches long)
Model DA11000: Auger bucket WITH STANDARD DISCHARGE TYPE AUGER best for distributing only (doesnot have the extra paddles as on the mixing auger), use to distribute material such as concrete, sand, washed gravel up to 3/4 inches, agricultural grains and wildlife feed, includes multi-linked output chutes (24 inches long and 36 inches long) and 7 ft. hose kit with flat faced couplers, wt. is 410 lbs. - Price is $4218.00 delivered (price includes shipping to commercial and residential addresses with normal delivery access in the U.S. 48 states), ships by truck
Model DA11001: Auger bucket WITH MIXING TYPE AUGER WITH EXTRA PADDLES ON AUGER FOR MIXING MATERIALS - for mixing and discharge of concrete, sand, washed gravel (3/4 inch diameter maximum), agricultural grains, and wildlife feed, includes multi-linked chutes (24 inches and 36 inches long) and 7 ft. hydraulic hose kit with flat faced couplers, wt. is 412 lbs. - Price is $4499.00 delivered (price includes shipping to commercial and residential addresses with normal delivery access in the U.S. 48 states), ships by truck
Model DA11002: Auger bucket WITH STANDARD DISCHARGE TYPE AUGER best for distributing only (doesnot have the extra paddles as on the mixing auger),
for use with heavy or dry materials in extreme applications, includes multi-linked chutes (24 inches and 36 inches long) and 7 ft. hose kit with flat faced couplers, wt. is 410 lbs. - Price is $4470.00 delivered (price includes shipping to commercial and residential addresses with normal delivery access in the U.S. 48 states), ships by truck
Model DA11003: Auger bucket FOR MIXING - HAS MIXING TYPE AUGER WITH WITH EXTRA PADDLES FOR MIXING MATERIALS AND AND THIS MODEL HAS HEAVY SERVICE MOTOR for mixing and discharge of heavy or dry materials in extreme applications, includes multi-linked chutes (24 inches and 36 inches long), and 7 ft. hydraulic hose kit with flat faced couplers, wt. is 430 lbs. - Price is $4665.00 delivered (price includes shipping to commercial and residential addresses with normal delivery access in the U.S. 48 states), ships by truck
Model DA11004: Auger bucket FOR SANDBAGGING, INCLUDES SCRAPER BLADE IN HOPPER TO ALLOW LOADING OF LOOSE MATERIALS FROM A PILE, HAS DISCHARGE TYPE AUGER (does not have extra mixing paddles on auger), best for discharge of concrete, sand, washed gravel (3/4 inch diameter maximum), agricultural grains, and wildlife feed, includes scraper blade to allow loading loose materials from pile, multi-linked chutes (24 inches and 36 inches long) and 7 ft. hydraulic hose kit with flat faced couplers, wt. is 430 lbs. - Price is $4715.00 delivered (price includes shipping to commercial and residential addresses with normal delivery access in the U.S. 48 states), ships by truck
Model DA11005: Auger bucket FOR DISCHARGE OF ASPHALT, HAS HEAVY SERVICE HIGH TEMPERATURE MOTOR, AND HAS METAL AUGER includes multi-linked chutes (24 inches and 36 inches long) and 7n ft. hydraulic hose kit with flat faced couplers, wt. is 430 lbs. - Price is $4840.00 delivered (price includes shipping to commercial and residential addresses with normal delivery access in the U.S. 48 states), ships by truck
Please allow 2 weeks before shipment on auger buckets
Accessories
Model DA11017: Hopper extension, add capacity to hopper add 1/4 yard to bring capacity up to 3/4 yard total, wt. is 100 lbs. - Price is $450.00 plus $150.00 shipping if ordered and shipped separately (no shipping on this item if ordered with a hopper however)
We make every effort to keep prices current and correct as shown on our product pages. Prices do change frequently however; we will notify you of any changes when we receive your order so you can make any adjustments or changes to the order. We are not responsible for information or pricing on copies of our web pages on the search engines that are out of date. If you navigated to this page by clicking a link in the search engine listings, then click on the reload button on your browser to make sure you are viewing a current version of this page from our website. You can also go to www.wikco.com and link to this page from our index.
Wikco.Com is a national equipment dealer selling directly to the end user
To Order: Click On The Order Form Button Below For Ordering And Payment Information
Please Order In Writing Only Using Our Order Form.
If Our Index Doesnot Appear On The Left Side Of This Page Then Click On The Home Button Above To See The Many Other Products We Sell
For Sales or Technical Questions, Parts Information, Or To Check On An Order Please E-Mail us at: sales@wikco.com
All information is on our web site at: www.wikco.com
If you have additional questions, please call us at 520-316-0446 Or Fax us at 520-316-0446