Destroyer D90 Commercial Flail Shredding Mower

The Befco Destroyer D90 Commercial Flail Shredding Mower is designed for heavy duty use mowing roadways and ditchbanks. The mower shreds limbs up to 1 inch in diameter and shreds all weeds, cornstocks, and other similar debris, using cast 1 piece cutting flails. The unique design of the D90 mower has either 12 inch or 16 inch hydraulic side shift to the right for extended reach when mowing road shoulders. The Destroyer D90 mounts on category 1 or 2 three point hitches and is powered by your tractor's 540 rpm pto. The hydraulic side shift requires one hydraulic outlet (plug in two hoses).

Click Here To Expand This To A Full Page Version

To See Other Products - Click Here To Go To Our Index

Destroyer D90 Commercial Flail Shredder With Hydraulic Side-Shift
  • Features/Specifications


    • Specifications Befco Destroyer D90 Commercial Flail Stredder With Hydraulic Side Shift

    Has Hydraulic Side Shift, Can Be Center Mounted Or Shifted To Right Either 12 Or 16 Inches Depending Upon The Model
  • Cutting height is adjustable from 3/4 inches to 5 inches using the height adjustment roller with scraper


  • Mounts on your 40 to 90 hp tractor on either category 1 or 2 three point hitches


  • Unit comes standard with a single pto gear box for rear mounting on tractors with a category 1 or 2 three point hitch. Mower can be front mounted on utility vehicles and tractors that have a front mount three point hitch and pto. Please Note: The frame already has the dual hitch connections in place, but a dual pto gearbox is required to make use of the front mounting. To use the unit on the front of your tractor, order the optional dual pto gear box 009-9968 listed in the options section below.


  • The unit comes with a driveline (pto shaft) with overrunning clutch (slip clutch) 1 3/8 inch ASAE category 6 driveline


  • Unit is belt driven off the shaft that extends from the gearbox, has 4 heavy duty XPBX type belts and manual belt tensioner


  • Mower has hydraulic side shift - 12 inches on 60 inch mower, and 16 inches of shift on the 72 and 88 inch wide mowers


    • Destroyer Flail Mower Features - One Piece Hammer Flails, Heavy Duty Belt Drive, Adjustable Height Roller
  • Mower uses heavy one piece hammer flails for shredding, weeds, debris, and limbs up through 1 inch in diameter. The 60 inch wide model has 16 hammer flails, 72 inch model has 20 hammer flails, and 88 inch wide model has 24 hammer flails


  • The rotor that the flails mount on is 5 1/4 inches in diameter and is contructed of 5/16 inch thick tubing


  • Height adjustment of from 3/4 inches to 5 inches is accomplished using the adjustable rear roller; the roller has a mud scraper to make sure cutting height is consistant


  • Height adjustment roller tube is 6 5/8 inches in diameter and constructed of 3/16 inch thick tubing


    • D90 In Use At Vineyard


  • Model D90-060: Destroyer commercial flail shredder with hydraulic side shift, has 60 inch mowing width, 69 inch overall frame width, rotor rpm is 1961, blade tip speed is 8268 ft. per minute, uses 16 flail hammers, wt. is 1257 lbs. - Click here for the current price and/or to order


    • Order Form

  • Model D90-072: Destroyer commercial flail shredder with hydraulic side shift, has 72 inch mowing width, 81 inch overall frame width, rotor rpm is 1961, blade tip speed is 8268 ft. per minute, uses 20 flail hammers, wt. is 1345 lbs. - Click here for the current price and/or to order


    • Order Form

  • Model D90-088: Destroyer commercial flail shredder with hydraulic side shift, has 88 inch mowing width, 96 inch overall frame width, rotor rpm is 1961, blade tip speed is 8268 ft. per minute, uses 24 flail hammers, wt. is 1491 lbs. - Click here for the current price and/or to order


    • Order Form

  • Optional Equipment


  • Order The Two Items Below In The Drop Down Menu On The Mower Order Page


  • Part No. 009-9968: Gear box with dual pto, this price is for changing out from single pto gear box to double pto model on a new unit - Price is $344.00 to upgrade to dual pto gearbox


  • Part No. 009-9969: Side skid plates, to use these you will remove the height adjustment roller and run the units on the non-adjustable skid plates giving you a cutting height of approximately 3/4 inches -Click here for the current price and/or to order


  • If you need to order item 009-9969 separately without a mower, click the order form button below


    • Order Form

    Click Here To Expand This To A Full Page Version

    Wikco.Com is an equipment dealer selling directly to the end user
    To Order: Click On The Order Form Button Directly Below For Ordering And Payment Information


    Order Form

    Home Page/Index

    If Our Index Doesnot Appear On The Left Side Of This Page
    Then Click On The Home Button Above To See The Many Other Products We Sell

    For Sales or Technical Questions, Parts Information, Or To Check On An Order
    Please E-Mail us at: wikcocom@msn.com
    All information is on our web site at: www.wikco.com
    If you have additional questions,

    Click Here For Our Contact Information


    Wikco.com Inc.

    Copyright © Wikco.Com Inc., 1997 to present - All Rights Reserved, A U.S. Corporation