Danuser Hydraulic Digger/Earth Augers

The Danuser Hydraulic Drive Diggers/Earth Augers are available to attach to almost any piece of equipment you have on the farm or construction site. Model 8300 can attach to the front or side of your front-end loader's bucket; model 8800 attaches to your tractor's category 1 three point hitch; model 8900 is really versatile, attaching to front-end loaders, skid steer loaders, or the three point hitch of your tractor. All of these diggers handle augers from 4 to 36 inches in size with either a 2 inch, 2 9/16th inch spindle (depending upon the model). All models are high quality commercial pieces of equipment designed for use on your farm or construction site. Units have a 5 year warranty on the gear box against defects in materials and workmanship.

• Features/Specifications - Model 8300 Digger



• Model 8300 hydraulic digger attaches to the front or side of your front end loader and gives you complete control from the tractor seat
• Handles hydraulic systems of 5 to 10 gpm at 1500 to 3000 psi, and uses the same gear set and 3.1:1 gear ratio as the model 8800
• Tractor must be equipped with a three or four-way valve and remote outlets
• Motor is Eaton high torque hydraulic motor
• Includes auger adapter guard for maximum safe operation
• Spindle size is 2 inch round





• Model 8300-1: Hydraulic digger, 2 inch round spindle, for hydraulic systems delivering 5 to 10 gpm at 1500 to 3000 psi, and provides maximum torque at spindle of 840 ft. lbs. at 3000 psi, maximum auger diameter you can use is 14 inches, digger head comes less adapter kit, hoses, and auger, order adapter kits separately below, wt. is 134 lbs. - Price is $1695.00 delivered (commercial and residential addresses), ships by truck



• Model 8300-2: Hydraulic digger, 2 inch round spindle, for hydraulic systems delivering 10 to 20 gpm at 1500 to 3000 psi, provides maximum torque at spindle of 1200 ft. lbs. at 3000 psi, maximum diameter auger that can be used is 24 inches, comes less adapter kit, hoses, and augers, wt. is 135 lbs. - Price is $1745.00 delivered (commercial and residential addresses), ships by truck



• Adapter Kits - Model 8300


• Model 6143: Universal loader bucket mounting kit, fits buckets that are 48 inch minimum width and 90 degrees maximum distance around outside, wt. is 87 lbs. - Price is $399.00 plus $85.00 shipping (shipping paid if ordered with digger however)



• Model 6216: Bolt on bucket mount kit, will mount on horizontal or vertical surface, (less hardware), wt. is 12 lbs. - Price is $69.00 plus $16.00 UPS shipping (shipping paid if ordered with digger however)



• Model 6359: 3/4 inch diameter hose kit, 15 ft. long, for use with bucket mount, wt. is 18 lbs. - Price is $215.00 plus $20.00 UPS shipping (shipping paid if ordered with digger however)



• Model 6360: 3/4 inch diameter hose kit, 20 ft. long, for use with bucket mount, wt, is 23 lbs. - Price is $245.00 plus $22.00 UPS shipping (shipping paid if ordered with digger however)



• Model 6361: 3/4 inch diameter hose kit, 25 ft. long, for use with bucket mount, wt. is 29 lbs. - Price is $275.00 plus $24.00 UPS shipping (shipping paid if ordered with digger however)



• Features/Specifications - Model 8800 Digger





• Hydraulic digger made to mount on category 1 three point hitches of tractors
• Equipped to handle hydraulic systems of 5 to 20 gpm
• Gearbox uses a heat treated, forged steel gear set and gear ratio of 3.1:1, and is designed to outlast all other brands
• The tractor must be equipped with a three or four-way valve and remote outlets







• Model 8800-1: Hydraulic digger, 2 inch round spindle with Eaton motor and auger adapter guard, for most ASAE 3 pt. hitch category 1 tractors with hydraulic systems delivering 5 to 10 gpm at 1500 to 3000 psi, provides maximum torque at spindle of 840 ft. lbs. at 3000 psi, comes complete with boom, yoke, gearbox and mounting pins, (less hoses and augers), maximum diameter of auger you can use on this model is 14 inches, wt. is 198 lbs. - Price is $2035.00 delivered (commercial and residential addresses), (shipped by truck)



• Model 8800-2: Hydraulic digger, 2 inch round spindle with Eaton motor and auger adapter guard, for most ASAE three point hitch category 1 tractors with hydraulic systems delivering 10 to 20 gpm at 1500 to 3000 psi, provides maximum torque at spindle of 1200 ft. lbs. at 3000 psi, comes complete with boom, yoke, gearbox, and mounting pins, less hoses and augers), maximum diameter of auger you can use on this model is 24 inches, wt. is 199 lbs. - Price is $2059.00 delivered (commercial and residential addresses), shipped by truck



• Digger Accessories For Models 8300 And 8800 Hydraulic Diggers


• Part# 6109: Yoke extension kit - for model 8800, provides approximately 6 inches of additional lift height to the digger, amount of additional lift height will vary depending upon the tractor make and model, wt. is 5 lbs. - Price is $74.00 plus $12.00 UPS shipping (shipping paid if ordered with digger)



• Part# 6136: Auger adapter guard as a replacement, is furnished with new machines, required on all machines with a 2 inch round spindle, wt. is 9 lbs. - Price is $39.00 plus $12.00 UPS shipping (shipping paid if ordered with a digger)



• Part# 6220: Down force package, for model 8800, complete with relief valve and automatic dump valve, (less hoses), wt. is 57 lbs. - Price is $449.00 plus $35.00 UPS shipping (shipping paid if ordered with a digger)



• Note: Tractor must be equipped with remote outlets and either a three-way valve (as used in operation of a single-acting cylinder) or a four-way valve (as used in the operation of a double-acting cylinder), tractor hoses are not supplied, you need one hose to a pressurized outlet, and one hose to the sump or reservoir.



• Part No. 6347: Adapter kit for John Deere 4110/4115 tractors, wt. is 7 lbs. - Price is $134.00 plus $12.00 UPS shipping (shipping paid if ordered with a digger)






Model 8900 Hydraulic Powered Digger can be mounted on skid steer loaders, the buckets of front loaders, and the three point hitches of most tractors (categories 1 and 2). The diggers use high quality Eaton hydraulic motors and have planetary gear drive to stand up to heavy use. Two digger heads are available two accomodate augers that need a 2 9/16 inch round spindle; one model is also available if you need a unit for augers with a 2 inch hex spindle.





• 8900 Series Digger runs at an rpm of 48 to 95 rpm depending upon pressure of your hydraulic system


• Model 8900-4: Hydraulic digger, 2 9/16 inch round spindle with Eaton hydraulic motor, planetary gear drive, includes auger adapter guard, for hydraulic systems delivering between 10 to 20 gpm at 1500 to 3000 psi, provides maximum torque at spindle of 1880 ft. lbs. at 3000 psi, maximum diameter auger you can use is 36 inches, (comes less adapter kit, hoses and auger - the appropriate adapter kit must be ordered with digger head), wt. is 159 lbs. - Price is $2145.00 delivered (commercial and residential addresses), ships by truck



• Model 8900-7: Hydraulic digger, 2 9/16 inch round spindle, with Eaton hydraulic motor, planetary gear drive, includes auger adapter guard, for hydraulic systems delivering 14 to 30 gpm at 1500 to 3000 psi, provides maximum torque at spindle of 2530 ft. lbs. at 3000 psi, maximum diameter auger you can use is 36 inches, (comes less adapter kit, hoses and auger - the appropriate adapter kit must be ordered with digger head), wt. is 161 lbs. - Price is $2195.00 delivered (commercial and residential addresses), ships by truck



• Model 8900-8: Hydraulic digger, 2 inch hex spindle, with Eaton hydraulic motor, planetary gear drive, includes auger adapter guard, for hydraulic systems delivering 14 to 30 gpm at 1500 to 3000 psi, provides maximum torque at spindle of 2530 ft. lbs. at 3000 psi, maximum diameter auger you can use is 36 inches, (comes less adapter kit, hoses, and auger - the appropriate adapter kit must be ordered with digger head), wt. is 160 lbs. - Price is $2245.00 delivered (commercial and residential addresses), ships by truck



• Note: The tractor must be equipped with a three or four-way valve and remote outlets


• Adapter Kits And Accessories For 8900 Series Diggers


• Part 9865: Skid-Steer Quick Attach Mounting Kit (includes knuckle), attaches digger to skid steer with standard SAE quick couplers, wt. is 156 lbs. - Price is $375.00 plus $195.00 shipping (commercial and residential addresses), shipping paid if ordered with digger head



• Part 9607: Bolt on bucket mount kit (includes knuckle), will mount on a vertical surface, (less hardware), wt. is 39 lbs. - Price is $225.00 plus $30.00 UPS shipping (shipping paid if ordered with digger head)



• Part 9049: Crane boom and yoke, (for most ASAE three point hitch tractors), to be used with 9051 or 9052 assembly hardware packages, to use as a lifting boom, order 7480 hook and yoke assembly, wt. is 114 lbs. - Price is $475.00 plus $95.00 shipping (shipping paid if ordered with digger head)



• Part 9051: Assembly Hardware Package, allows boom to be mounted on ASAE 3 point hitch tractors, category 1 or 2 pin size, category 1 width only, wt. is 9 lbs. - Price is $45.00 plus $12.00 UPS shipping (shipping paid if ordered with digger head)



• Part 9052: Assembly Hardware Package, allows boom to be mounted on ASAE 3 point hitch tractorsk category 2 pin size, category 2 width only, wt. is 12 lbs. - Price is $75.00 plus $14.00 UPS shipping (shipping paid if ordered with a digger head)



• Part 7270: Auger Adapter Guard, model 8900-4 and 8900-7 units come with this standard, listed as replacement for damaged or lost units, required on all machines with 2 9/16 inch round spindle, with 2 3/8 inch diameter center column augers, wt. is 8 lbs. - Price is $34.00 plus $12.00 UPS shipping (shipping paid on accessories if ordered with an digger head)



• Part 7480: Hook And Yoke Assembly, use with 9049 crane boom for lifting up to 750 lbs., wt. is 10 lbs. - Price is $129.00 plus $14.00 UPS shipping (shipping paid on accessories if ordered with an digger head)



• Part 9545: Auger Adapter Guard, model 8900-8 unit comes with this standard, required on all machines with 2 inch hex spindles and/or 3 5/8 inch diameter center column augers - Price is $63.00 plus $12.00 UPS shipping (shipping paid on accessories if ordered with a digger head)



• Part 9079: Down Force Package, complete with relief and automatic dump valve, fits model 8900 when equipped with a 9049 crane boom, (less hoses), wt. is 51 lbs. - Price is $540.00 plus $35.00 UPS shipping (shipping paid on accessories if ordered with a digger head)



• Note: Tractor must be equipped with remote outlets and either a three-way valve (as used in operation of a single-acting cylinder) or a four-way valve (as used in the operation of a double - acting cylinder). Hoses to the tractor are not supplied. You need one hose to a pressurized outlet and one hose to the sump or reservoir.
• Part 9872: 1/2 inch diameter hose kit, 96 inches long with abrasion sleeves, with flat faced ISO couplers, wt. is 15 lbs. - Price is $215.00 plus $22.00 UPS shipping (shipping paid on accessories if ordered with a digger head)



• Part 9873: 3/4 inch diameter hose kit, 96 inches long with abrasion sleeves, with flat faced ISO couplers, required for applications of 20 gpm or more, wt is 20 lbs. - Price is $295.00 plus $26.00 UPS shipping (shipping paid on accessories ordered with a digger head)




Click Here For More Photos Of the Augers And Accessories










• All augers and parts are plus shipping (unless ordered with a powerhead). Augers up through 12 inches in diameter can be shipped by UPS. Augers larger than 12 inches in diameter are shipped by truck.



• Shipping Charges are as follows: 4 inch augers are $25.00 UPS Shipping, 6 inch augers are $35.00 shipping, 8 inch augers are $40.00 shipping, 10 inch augers are $55.00 shipping, 12 inch augers are $65.00 UPS shipping.



• Augers larger diameter than 12 inches are shipped by truck and shipping cost is $120.00 for one 12" auger and $150.00 for 2 or more on the same order.



• Auger Extensions up to and including 48 inches long are $15.00 UPS shipping, augers 72 inches long are $30.00 UPS shipping.



• For larger shipments we will quote price, and again, no extra shipping cost for augers ordered with a power head (limit 500 lbs. of accessories).


Click Here For More Photos Of the Augers And Accessories

We make every effort to keep prices current and correct as shown on our product pages. Prices do change frequently however; we will notify you of any changes when we receive your order so you can make any adjustments or changes to the order. We are not responsible for information or pricing on copies of our web pages on the search engines that are out of date. If you navigated to this page by clicking a link in the search engine listings, then click on the reload button on your browser to make sure you are viewing a current version of this page from our website. You can also go to www.wikco.com and link to this page from our index.

Click Here To Expand This To A Full Page Version

Wikco.Com is a national equipment dealer selling directly to the end user
To Order: Click On The Order Form Button Below For Ordering And Payment Information And Information, And Information On Any Cash Discounts That May Be Available
Please Order In Writing Only Using Our Order Form.

  

If Our Index Doesnot Appear On The Left Side Of This Page
Then Click On The Home Button Above To See The Many Other Products We Sell

For Sales or Technical Questions, Parts Information, Or To Check On An Order
Please E-Mail us at: sales@wikco.com
All information is on our web site at: www.wikco.com
If you have additional questions, please call us at 520-316-0446 Or Fax us at 520-316-0446

Wikco.com Inc.

Copyright © Wikco.Com Inc., 1997-2009 All Rights Reserved, A U.S. Corporation, Casa Grande, Arizona