Metal Forming Tools

This page contains a variety of Metal Forming Tools, many of them hand tools. Look through the metal fabrication equipment section of our index for all the metal fabrication tools we offer; on this page we have: R-M3 manually powered roll bender (look for other roll benders in our index); MSS-18 manually powered shrinker/stretcher machine; MSS-16 table top shrinker/stretcher; foot and hand lever powered sheet metal notchers; ratcheting arbor presses; hand punch; bench mounted combination shear and brake; a throatless shear; multi-purpose shears; a manual ironworker and an English Wheel.

     
     
     
  
  

R-M3 Manually Powered Roll Bender - Ring Roller

• Bench mounted manually powered roll bender



• Solid round capacity of .25 inches (1/4 inch), and flat bar capacity of 1 inch wide by .1875 inch thick maximum (3/16 inch)



• Minimum diameter ring that it can roll is 3 inches



• Solid metal handle is 13.5 inches in length



• Weight is 18 lbs.



• Price is $160.00 delivered (price includes shipping), ships by UPS





Shrinker/Stretchers


• Model MSS-18 pedestal mounted hand operated shrinker/stretcher



• Has a capacity of 18 gauge mild steel, and 16 gauge for aluminum



• Housing and jaws for shrinking and stretching included



• Adjustable height pedestal stand included as shown, total weight is 90 lbs.



• Price is $455.00 delivered (price includes shipping), ships by UPS





• Model MSS-16 bench mounted shrinker/stretcher



• Has a material capacity of 16 gauge for mild steel and 14 gauge for aluminum



• Has a throat depth of 8 inches



• Bench mount design, approximate dimensions of 36 inches long x 20 inches wide by 15 inches high, wt. is 50 lbs.



• Price is $629.00 delivered (price includes shipping), ships by UPS





Arbor Presses


• Model AP-3R three ton ratcheting arbor press



• Ratcheting action with square ram for greater strength, with rigid cast frame, and includes 4 position die plate



• Ram size is 1 1/2 inches, throat depth is 5 inches, maximum material height is 11 inches



• Weight is 132 lbs.



• Price is $645.00 delivered (price includes shipping to commercial and residential addresses), ships by truck





• Model AP-5 five ton arbor press (maximum capacity is 5.6 tons)



• Adjustable handle for increased leverage



• Square ram 2 inches x 2 inches for greater strength, rigid cast frame



• Maximum arbor size is 2 1/4 inches



• Throat depth is 8.89 inches, maximum material height is 15 3/4 inches



• Shipping weight is 365 lbs. - ships by truck



• Price is $795.00 delivered (price includes shipping to commercial and residential addresses), ships by truck





Multi-Purpose Shears And Brakes (photos have been cropped, all manual shears have a handle approximately 32 inches long, not shown)


• Model MPS-8G Multi-Purpose Shear



• Hand operated shear with an 8 inch long blade, with a shear capacity of: 0.5 inch thick on solid round; 2.75 inchs wide x 0.236 inches thick for flat bar; 0.236 inches thick for sheet steel



• Shears flat and round stock, and has adjustable material hold down, has multi-edge blades for increased productivity, spring assisted action for increased leverage, gear driven



• Shipping weight is 42 lbs.



• Price is $195.00 delivered, ships by UPS





• Model MPS-12 Multi-Purpose Shear With 12 Inch Blade Length



• Shears flat and round stock, has ajustable material hold down, and rigid construction



• Multi-edge blades for increased productivity, manually powered, has spring assisted action for increased leverage



• Shipping weight is 62 lbs.



• Price is $229.00 delivered





Manual Ironworker


• Model SW-22M Manual Ironworker



• Shears angle iron (2.25 inches wide x 0.275 inches thick), flat bar (3.5 inches wide x 0.551 inches thick), T-Bar (2.25 inches x 0.275 inches thick), solid round stock 0.866 inch diameter, and solid square stock 0.787



• Unit is hand operated, lever has spring assisted return



• Dimensions are: 49 inches long x 16 inches wide x 26 inches high, wt. is 253 lbs.



• Price is $719.00 delivered (price includes shipping to commercial and residential addresses), ships by truck





Combination Shear/Brake And Throatless Shear


• Model SB-8 Combination Shear and Brake



• Has a bed width of 8 inches and a shear capacity of 20 gauge mild steel; it also has a bend capacity of 20 gauge mild steel



• Maximum bend angle is 90 degrees



• Weight is 27 lbs.



• Price is $175.00 delivered, ships by UPS





• Model MPS-3 Throatless Shear



• Bench mounted throatless metal shear with ratcheting handle and adjustable material stop with angle gauge



• Has a shear capacity of 0.118 inch (3mm) thick sheet metal



• Unit is manual (hand operated with ratcheting handle)



• Weight is 49 lbs.



• Price is $279.00 delivered, ships by UPS





Hand Punch


• Model HP-160 Hand Punch



• A bench mounted hand punch, has adjustable material stop and is supplied with 9 sets of round punches and dies



• Has an extra long handle for increased leverage



• Maximum punching capacity is .314 inches (approximately 5/16 inch thick)



• Has a throat depth of 6.25 inches



• Dimensions are 20 1/2 inches long x 9 inches wide x 36 1/2 inches high, shipping weight is 176 lbs.



• Price is $769.00 delivered (price includes shipping to commercial and residential addresses), ships by truck





Manual Powered Sheet Angle Notchers


• Model SN-F16-FN floor mounted pedestal style sheet metal notcher



• Unit is foot pedal operated, has adjustable material stops



• Has fixed 90 degree notching, notches materials with maximum thickness of 16 gauge sheet metal



• Maximum notch dimensions are 3 inches x 3 inches, notch angle is 90 degrees fixed



• Dimensions are 60 inches long x 44 inches wide x 48 inches high, weight is 310 lbs.



• Price is $829.00 delivered (price includes shipping to commercial and residential addresses), ships by truck




  
• Model SN-F16-HN Fixed Angle Sheet Metal Notcher



• Manually operated, hand notcher, free standing cabinet mounted



• 90 degree fixed angle notcher, cuts up to 16 gauge mild steel, maximum notch size is 6 inches x 6 inches with a 3/4 inch stroke



• Work table measures 18 inches x 12 inches



• Dimensions are 60 inches long x 44 inches wide x 48 inches high, wt. is 275 lbs.



• Price is $899.00 delivered (price includes shipping to commercial and residential addresses), ships by truck





EW-40 Manually Powered English Wheel



• Includes 5 radius anvils




• Foot wheel for pressure adjustment




• Lever actuated quick adjust anvil handle and flip-out holder for easy tooling changeover



• Has 18 gauge capacity for mild steel, and 14 gauge for aluminum



• Has a throat depth of 41 inches



• Weight is 388 lbs.



• Model EW-40 English Wheel is $1778.00 delivered (price includes shipping to commercial and residential addresses), ships by truck



Click Here To Expand This To A Full Page Version



We sell directly to the end user.

To Order: Click On The Order Form Button Below For Ordering And Payment Information
Please Order In Writing Only Using Our Order Form.

  

If Our Index Doesnot Appear On The Left Side Of This Page
Then Click On The Home Button Above To See The Many Other Products We Sell


For Sales or Technical Questions, Parts Information, Or To Check On An Order
Please E-Mail us at: sales@wikco.com
All information is on our web site at: www.wikco.com
If you have additional questions, please call us at 520-316-0446 Or Fax us at 520-316-0446




Wikco.com Inc.


Copyright © Wikco.Com Inc., 1997-2008 All Rights Reserved