Hydraulic And Electric Rotary Draw Benders

The Rotary Draw Benders are available in models with either a self-contained hydraulic power unit, or electric powered. Several models of RMD benders are available with different capacities for bending pipe, tubing (including Chromolly, regular round, square), and flat stock, angle iron, solid rod (steel, aluminum, and stainless). The units have manual stops and scales to measure degrees of bend, and several models can be purchased with optional controller so you can program as many as 20 different piece programs with up to 10 bends per program. The powered Rotary Draw Benders are for precision bending for production or prototype work; if you need precision bending, then one of the power Rotary Draw Benders is what you should look at. These benders are great for bending hand rail, motorcycle frames, roll cages and hundreds of other items. The RMD benders are made in the U.S.A.. Many die sets are available, and listed at the bottom of this page. The die sets are extra, and DO NOT COME WITH ANY OF THE BENDERS.

Click Here To Expand This To A Full Page Version

To See Other Products - Click Here To Go To Our Index

Model RMD 150 Hydraulic Rotary Draw Bender
  • Features/Specifications - Model 150 Rotary Draw Bender


  • Model 150 bends using hydraulic power - electric pump with self-contained hydraulic system


  • Unit can be purchased with or without optional auto-stop assembly for repeatable bending (recommended for production work or where precision repeatability is required), other wise you can manually stop the bend using the standard degree dial on the unit.


  • Unit gives you continious bending up to a maximum 206 degrees without stopping or ratcheting


  • Variable speed controlled by operator


  • Quick release counter-die system allows bends to pull out in seconds without disassembly


  • Bend can be advanced after machine stops, saving on material and set-up costs


  • Has highly visible degree dial for accuracy


  • Dies are color-coded and interchangeable with all RMD benders


    • Specifications Model RMD 150

    Optional Auto-Stop Feature


  • Features/Specifications


  • Model 150: Standard model without auto-stop feature, but does have large degree dial for accuracy, 110 volt, hydraulic rotary draw tube and pipe bender, 2 inch pipe capacity, maxium CLR is 8 inches - Price is $6350.00 delivered (price includes shipping to commercial and residential locations), ships by truck


  • Model 150AS: Same as above, but with auto-stop feature, allowing repeatable bending - Price is $6950.00 delivered (price includes shipping to commercial and residential addresses), ships by truck


  • Model RDB-175 Tube And Pipe Bender


    • RDB-175 Hydraulic Tube And Pipe Bender
  • Bending capacities: mild steel pipe (schedule 40) - 2 inch diameter; aluminum pipe (schedule 40) - 2 inch diameter; stainless steel pipe (schedule 40) - 1.5 inch diameter; mild steel round tube 2.5 inch diameter and .125 wall thickness; aluminum round tube 2.5 inch diameter and 1.56 wall thickness; stainless steel round tube 2.375 diameter and .125 wall thickness; chromolly round tube 2 inch diameter and .125 wall thickness; mild steel solid rod 1.25 inch diameter; mild steel square tube 2 inch diameter and .125 wall thickness; minimum OD .25 inch


  • Maximum speed to 180 degrees - 12 seconds


  • Maximum center line radius (CLR) - 9 inches


  • Minimum center line radius (CLR) - 0.5 inches (1/2 inch)


  • Note: CLR capacity is variable depending upon material


  • Power requirements - 110 volt


  • Weight is 630 lbs.


  • Dimensions: 44 inches long x 28 inches wide x 42 inches high


    • Autostop Feature On Model RDB-175 Draw Type Pipe Bender   Ratchet Counter Die Adjustment On Model RDB-175 Draw Type Pipe Bender

  • Easy to read degree indicator with auto stop standard


  • Ratcheting counter die adjustment for quick tooling changes


  • RDB-175 pipe bender is a powerful machine capable of bending 2 inch schedule 40 pipe and up to 2 1/2 inch tubing with a wall thickness of .120 inch mild steel


  • The RDB-175 pipe bender is capable of 9 inch center line radius, and can easily bend 2 times the outside diameter depending on the wall thickness of the material. This model is a high speed version that returns at almost 300 percent of the bend rate, increasing production dramatically. This is a hands free model that is foot pedal controlled, and is great for serpentine bends such as bike racks


  • Programming is true, since the die head is measured. Other machines on the market measure cylinder placement, which doesn't give you true placement of the angle.


  • CLR (center line radius) on this machine is 9 inches, giving you the capacity for most applications.


  • The RDB-175 pipe bender has a fast and accurate ratcheting counter die positioner, allowing for the accute adjustments needed when working with hard to bend materials or materials with varying springback characteristics, material batches with hard spots, etc.


  • Model RDB-175: 110 volt hydraulic rotary draw tube and pipe bender, with adjustable automatic stop and ratcheting counter die holder, high speed movement, 2 inch pipe capacity, maximum 9 inch centerline radius, wt. is 630 lbs. - Price is $7620.00 delivered (price includes shipping to commercial and residential addresses), ships by truck


  • Model RDB-250 Rotary Draw Bender


    • RDB-250 Programmable Tube Bender
    Program Controller For RDB-250 Programmable Tube Bender
  • All RDB benders are made in the USA


  • RDB-250 tube bender has the strength to bend up to 2 1/2 inch tubing and 2 inch schedule 40 pipe and can be programmed with up to 170 programs with up to 10 bends per program


  • Up to a 20 ft. indexing table can be attached when multiple bends in variable planes are required, which is great for big production runs


  • The RDB-250 tube bender can bend at speeds up to 9 seconds for a 180 degree bend and can be programmed to bend up to 360 degrees, great for solid rod applications


  • Complex serpentine bends can be done with ease. A quick counter die release allows or quick removal of bends and allows for further bending of pre-bent material


  • The counter die positioner has a numerical counter so repositioning of the counter die is easy when recalling bending programs. Engaging bends is as simple as pressing the forward foot pedal, and reverse pedal when complete


  • Bending capacities: mild steel pipe (schedule 40) 2 inch diameter; aluminum pipe (schedule 40) 2 inch diameter; stainless steel pipe (schedule 40) 1.5 inch diameter; mild steel round tube 2.5 inch diameter with .125 wall thickness; aluminum round tube 2.5 inch diameter with .156 wall thickness; stainless steel round tube 2.375 max diameter with .125 wall thickness; chromolly round tube 2 inch diameter max with .125 wall thickness; mild steel solid rod 1.25 inch diameter; mild steel square tubing 2 inch diameter with .125 wall thickness


  • Minimum OD bender can accomodate is .25 inch (1/4 inch)


  • Maximum speed to 180 degrees - 9 seconds


  • Maximum center line radius (CLR) is 9 inches, minimum center line radius (CLR) is .5 inch (1/2 inch)


  • Power requirements - 220 volt single phase


  • Weight is 610 lbs.


  • Dimensions: 40 inches long x 32 inches wide x 43 inches high


  • RDB-250 tube bender has the strength to bend up to 2 1/2 inch diameter tubing and 2 inch schedule 40 pipe and can be programmed with up to 170 programs with up to 10 bends per program. You can attach an index table up to 20 ft. in length, for use when multiple bends in variable planes are required.


  • Model RDB-250: 220 volt single phase rotary draw bender with 170 job programmer, with 2 inch pipe capacity and maximum 9 inch CLR, wt. is 610 lbs. - Price is $10,095.00 delivered (price includes shipping to commercial and residential addresses)


  • Features/Specifications - Model 300 Electric Rotary Draw Benders


    • RMD 300 Series Electric Rotary Draw Benders
  • Features/Specifications


  • 300 Series Bender will bend up to 2 inch schedule 40 pipe and up to 3 inch OD tube


  • Two models are available a low profile portable model with pneumatic tires, and the standard model with or without OCS programable controller


  • The optional OCS unit allows the user to program up to 10 bends per program, with a storage capacity on the unit of 20 programs. The OCS is actuated by foot pedal controls and is not available on the model 300-P low profile unit


  • The extra heavy duty design of these machines is normally seen on much larger models


  • To set up a bend, simply turn the degree hand wheel to the desired bend angle (including spring back). When performing a bend, the die head automatically stops at the degree indicated on the numerical counter; allows for accurate repeatability when performing one or multiple bends. The unit is very simple to operate, so a large amount of production at a high level of accuracy and repeatability can be done with this bender.


  • Bends can be advanced after stopping the machine, saving on set-up and material costs


  • Die head automatically stops at the home position when in return model


  • Overload protection ensures long component life


  • Heavy duty steel construction for durability


  • Simple operating controls: On/Off, variable speed, forward/reverse, and degree hand wheel


  • All die sets are color coded for easy identification


  • Designed to accept a wide variety of tooling sizes and types


  • Options include the IDX positioning table, foot pedal controls, or quick release


  • Capacities: mild steel pipe (schedule 40) 2 inch diameter; aluminum pipe (schedule 40) 2.5 inch diameter; stainless steel pipe (schedule 40) 1.5 inch diameter; mild steel round tube 3 inch diameter .095 wall; aluminum round tube 2.5 inch diameter .156 wall; stainless steel round tube 2.375 diameter .164 wall; chromolly round tube 2 inch diameter .125 wall; mild steel solid rod 1.25 inch diameter; mild steel square tube 2 inch square .125 wall, minimum OD is .25 inch


  • Maximum speed to 180 degrees 8 to 16 seconds depending upon material


  • Maximum center line radius is 15 inches, minimum center line radius (CLR) is .5 inch (1/2 inch)


  • 220 volt single phase standard, or 3 phase power available


  • Weight is 710 lbs.


  • Dimensions: 50 inches long x 28 inches wide x 42 inches high


  • Model 300-STD: Programable electric rotary draw bender, programable bender with dial in programming, 220 volt single phase electric motor, variable speed, machine wt. is 540 lbs. - Price is $12,369.00 delivered (price includes shipping to commercial and residential addresses), ships by truck


  • Model 300-PRG: Programable electric rotary draw bender with OCS controller that lets you create and store bending programms (20 programs with 10 bends per program), has foot pedal control for forward and reverse, machine wt. is 540 lbs - Price is $14,369.00 delivered (price includes shipping to commercial and residential addresses), ships by truck


  • Accessories


  • Model IDX-10-CMH-4-300: Rotary Positioning Index Table specifically for model RDB-300 bender, has gliding rotary through 4 jaw chuck head and mechanical stops for positioning, allows repeatability, table (rail length is 10 ft.) - Price is $4595.00 delivered (price includes shipping to commercial and residential addresses), ships by truck


  • Model IDX-05: Rotary Positioning Index Table extension - Price is $3645.00 delivered (price includes shipping to commercial and residential addresses), ships by truck


    • Bender Accessories

  • Features/Specifications Model RDB-350-S Programmable Rotary Draw Bender

  • Features/Specifications - Model 350 Bender


    • RMD350 Electric Rotary Draw Bender

    Optional Touch Screen Holds 140 Bending Programs

    RMD350 Electric Rotary Draw Bender
  • The quick release counter die system is standard, and the heavy duty solid steel construction and powerful electric motor, combine for long lasting durability


  • The model 350 can be fitted with the optional IDX Index table


  • Standard capacity on all draw benders is 180 degrees for tubing. Universal adapter plate accessory is available as an option (is standard with UB-350) to allow bending of solid round and square material up to 360 degrees.


  • Capacities Model RDB-350: mild steel pipe (schedule 40) 2.5 inch diameter; aluminum pipe (schedule 40) 3 inch diameter; stainless steel pipe (schedule 40) 2 inch diameter; mild steel round tube 3 inch diameter .187 wall thickness; aluminum round tube 3.5 inch diameter .250 wall thickness; stainless steel round tube 3 inch diameter .125 wall thickness; chromolly round tube 2.5 inch diameter .125 wall thickness; mild steel solid rod 1.5 inch diameter; mild steel square tube 3 inch square .125 wall thickness; minimum OD .25 inch


  • Maximum speed to 180 degrees is 16 seconds


  • Maximum centerline radius is 24 inches, minimum centerline radius is .5 inches


  • Power requirements: 220 volt 3 phase standard


  • Weight is 1500 lbs.


  • Dimensions: 69 inches long x 32 inches wide x 46 inches high


  • Operator control station allows user to store up to 170 programs with up to 10 bends per program


  • Extra heavy duty design normally seen on larger models gives you more value for the investment


  • Model 350-S utilizes a portable cart with wheels for easy movement around the production floor


  • To program a bend you simply need to punch in the bend number, then desired angle, and then add the spring back value for the material


  • Operator control station allows operator to control the bend (speed, and forward and reverse)


  • Quick release counter die system allows maximum efficiences for high production runs


  • Foot pedal indexing allows for hands free operation


  • Model RBD-350: Programable Electric Rotary Draw Bender, allows storing up to 170 programs containing 10 bends each, bends up to 2 1/2 inch schedule 40 pipe, 24 inch CLR (centerline radius) maximum, power is 220 volt three phase, machine wt. is 1100 lbs. - Price is $18,185.00 delivered (price includes shipping to commercial and residential addresses


  • Features/Specifications Model RDB-350-TS Rotary Draw Bender


    • Model RDB-350TS Programmable Rotary Draw Bender For Pipe And Tubing

  • Similar to model RDB-350 except it bends parts both clockwise and counter clockwise, stores 140 programms with up to 10 bends each


  • Model RDB-350-TS: Programmable Electric Rotary Draw Bender, allows storing up to 170 programs containing 10 bends each, bends up to 2 1/2 inch schedule 40 pipe, 24 inch CLR (centerline radius) maximum, power is 220 volt three phase, machine wt. is 1100 lbs. - Price is $24,680.00 delivered (price includes shipping to commercial and residential addresses), ships by truck


  • Accessories


  • Model UBP-1200: 12 inch universal bending plate adapter for Baileigh rotary draw benders, allows you to bend solids or other materials using custom tooling, bends to the left or right can bend more than 360 degrees - Price is $1435.00 delivered


  • Model AF-360: Plane Of Bend Degree Dial, works with any bender, indicator accurately detects where plane of bend is within total 360 degree rotation - Price is $285.00 delivered, ships by UPS


  • Model IDX-10-CMH-4-350: 10 ft. Rotary Positioning Index Table for RDB-350 bender, has gliding rotary through 4 jaw chuck head and mechanical stops for positioning, allows repeatability, table (rail length is 10 ft.) - Price is $4545.00 delivered (price includes shipping to commercial and residential addresses), ships by truck


    • Bender Accessories

  • Features/Specifications - Model 500 Hydraulic Rotary Draw Bender


    • Model 500 Hydraulic Rotary Draw Bender

    Model 500 Hydraulic Rotary Draw Bender

  • The heavy duty solid steel frame construction coupled with massive industrial grade hydraulics and innovative design give the model 500 the bending torqueto handle the bending of materials as large as 3 inch diameter schedule 40 pipe and 4 inch (.185 inch) wall mild steel


  • The model 500 utilizes a dial degree feature which allows the user to dial in the desired degree angle for repeatable bends


  • Model 500 is capable of bending 180 degree bends in one shot without stopping or ratcheting


  • This bender is extremely easy to use since it has one lever control


  • Like all RMD benders the model 500 is portable


  • The same die sets fit on all RMD benders, including the model 500


  • The massive capacity allows you do be able to do more jobs increasing productivity and profits


  • Capacities: mild steel pipe (schedule 40) 3 inch diameter; aluminum pipe (schedule 40) 3.5 inch diameter; stainless steel pipe (schedule 40) 2.5 inch diameter; mild steel round tube 3 inch diameter .250 wall thickness; aluminum round tube 3.5 inch diameter .250 wall thickness; stainless steel round tube 3.5 inch diameter .187 wall thickness; chromolly round tube 3.5 inch diameter .187 wall thickness; mild steel solid rod 2 inch diameter; mild steel square tube 3 inch .250 wall thickness; minimum OD .25 inch


  • Maximum speed to 180 degrees - 36 seconds


  • Maximum center line radius - 12 to 15 inches depending upon the material


  • Minium CLR is .5 inches (1/2 inch)


  • Power requirement is 220 volt single phase


  • Weight is 1800 lbs.


  • Dimensions: 70 inches long x 56 inches wide x 41 inches high


  • RDB-500: 220 volt single phase rotary draw hydraulic tube and pipe bender with 3 inch maxium pipe capacity, 12-15 inch centerline radius capacity, wt. is 1800 lbs. - Price is $25,995.00 delivered (price includes shipping to commercial and residential addresses), ships by truck


  • Accessories

    • Plane Of Bend Degree Dial Indicator
  • Model AF-360: Plane Of Bend Degree Dial, works with any bender, indicator accurately detects where plane of bend is within total 360 degree rotation - Price is $285.00 delivered


    • Bending Dies For All RMD Benders Listed Above

  • Shown are some of the most standard sizes available - many others available, contact us with your size requirements we may have the other sizes you need. CALL FOR PRICING ON INDIVIDUAL DIE SETS. PRICES FOR AVAILABLE MULTI-DIE PACKAGES ARE LISTED BELOW.


  • Die Sets For RMD Benders

    Available Dies For RMD Benders
  • Round Tubing Dies Available

  • DS-0750T-R250: 3/4 inch round tube die set, .058 inch minimum wall thickness - Contact us for price

  • DS-0875T-R300: 7/8 inch round tube die set, .058 inch minimum wall thickness - Contact us for price

  • DS-1000T-R300: 1 inch round tube die set, .063 inch minimum wall thickness - Contact us for price

  • DS-1250T-R400: 1 1/4 inch round tube die set, .083 inch minimum wall thickness - Contact us for price

  • DS-1500T-R500: 1 1/2 inch round tube die set, .083 inch minimum wall thickness - Contact us for price

  • DS-1750T-R700: 1 3/4 inch round tube die set, .083 inch minimum wall thickness - Contact us for price

  • Round Pipe Dies Available

  • DS-0500P-R250: 1/2 inch pipe die set for pipe with .840 inch OD - Contact us for price

  • DS-0750P-R300: 3/4 inch pipe die set for pipe with 1.050 inch OD - Contact us for price

  • DS-1000P-R300: 1 inch pipe die set for pipe with 1.315 inch OD - Contact us for price

  • Square Tubing Dies Available

  • DS-0500S-R300: 1/2 inch square tube die set - Contact us for price

  • DS-0750S-R350: 3/4 inch square tube die set - Contact us for price

  • DS-1000S-R450: 1 inch square tube die set - Contact us for price


  • Die Package Sets As Shown Above On The Chart

  • RT-1B: Round Tubing Die Package - Price is $2489.00 delivered, ships UPS


  • RP-1B: Round Pipe Die Package - Price is $2420.00 delivered, ships UPS


  • ST-1B: Square Tubing Die Package - Price is $4220.00 delivered, ships by UPS


  • RT-3B: Racing Die Package - Price is $3369.00 delivered, ships by UPS


  • RP-3B: Hand Rail Die Package - Price is $1029.00 delivered, ships by UPS


  • RT-2B: Round Tubing Die Package - Price is $3389.00 delivered, ships by UPS


  • RP-2B: Round Pipe Die Package - Price is $3175.00 delivered, ships by UPS


  • ST-2B: Square Tubing Die Package - Price is $5595.00 delivered, ships by UPS


  • The Complete List Of Standard Die Sets Currently Available


  • Individual die sets are available. Please e-mail us with the size you need and we will quote you the current price.


  • Bend-Tech Tube And Pipe Bending Design And Layout Software

    • Sample Screen On Program
  • Sample Screen From Layout Software Showing Dimensions/Bend Angles
  • This is design and layout software to allow you to layout all dimensions, including the start of the bend, end of bend, and center of bend, and from either direction. Use the software to set up the bend sequence and enter it into any of the programable benders; by using the program instead of trial and error, you will be able to design the bends faster, and without material waste, making bending much more profitable.


  • The software will allow you to increase your productivity, and make tube bending a profitable custom job you can do for other customers as well. We especially recommend using the program with any of the RMD benders, especially the programable benders, but can be used to increase productivity on any bender whether programable or not.


  • Features include: Easy design imput, pick points for dimensional placement, parametric style interface, CLR or Inside Radius (adjustable for each bend)


  • Bend allowance and K-factor available


  • Rotate sections to create a true 3-D part


  • Has a material data base, and parts are placed in a data base for future use


  • Has a graphical part recall


  • Help functions are fully video scripted (learn Bend-Tech in 30 minutes)


  • 3-D shaded model can be rotated dynamically


  • Create prints of the dimensional model, shaded model, flat layout, and title block


  • Dimension your model with either decimals or fractions


  • Flat includes bending data such as bend angles, CLR or inside radius, rotation angle and bend order


  • The preferences function includes controls for color, text sizes and arrow sizes, and are saved in user definable data bases


  • Model BT-SE: Bend Tech SE Tube And Pipe Bending Design And Layout Software, top of the line in tube and pipe bending software. SE version picks up where Pro Version leaves off (see below, Pro Version also available), now includes program for hand railing manufacturers - Price is $450.00 delivered, ships by UPS


  • Model BT-PRO: Bend Tech Pro Tube And Pipe Bending Design And Layout Software, is a lower cost alternative to the SE version listed above. If you are designing a chasis, roll cages, rock sliders, frames, or anything else that is a tubing assembly, then Bend-Tech Pro is where you want to start - Price is $300.00 delivered, ships by UPS


    • We make every effort to keep prices current and correct as shown on our product pages. Prices do change frequently however; we will notify you of any changes when we receive your order so you can make any adjustments or changes to the order. We are not responsible for information or pricing on copies of our web pages on the search engines that are out of date. If you navigated to this page by clicking a link in the search engine listings, then click on the reload button on your browser to make sure you are viewing a current version of this page from our website. You can also go to www.wikco.com and link to this page from our index.

    Click Here To Expand This To A Full Page Version

    Wikco.Com is a national equipment dealer selling directly to the end user
    To Order: Click On The Order Form Button Below For Ordering And Payment Information,
    And Information On Any Cash Discounts That May Be Available
    Please Order In Writing Only Using Our Order Form.


    Order Form   Home Page/Index

    If Our Index Doesnot Appear On The Left Side Of This Page
    Then Click On The Home Button Above To See The Many Other Products We Sell

    For Sales or Technical Questions, Parts Information, Or To Check On An Order
    Please E-Mail us at: sales@wikco.com
    All information is on our web site at: www.wikco.com
    If you have additional questions, please call us at 520-316-0446 Or Fax us at 520-316-0446


    Wikco.com Inc.

    Copyright © Wikco.Com Inc., 1997-2009 All Rights Reserved, A U.S. Corporation, Casa Grande, Arizona