Rear Mount Hydraulically Controlled Tractor Blades

The NVHL Series tractor blades are our most heavy duty series and are designed to be used on tractors up to 150 hp, and are available in widths of 8, 9, and 10 feet. The angle, tilt, and offset functions can all be set up for hydraulic control with the optional hydraulic cylinder kits. The extra heavy duty construction combined with features like an extra long boom that allows full angling of moldboards without the chance of damage to tractor tires, making the NVHL series blades some of the most versatile blades available.


NVHL Series Rear Mount Tractor Blades
NVHL-300XHD Series Tractor Blade For Tractors Up To 150 HP Maximum

Specifications NVHL-XHD Series Tractor Blades


  • Features/Specifications


  • The NVHL Series rear mount blades feature rugged performance and are designed for tractors up to 150 hp


  • These units have an innovative design that features an extra long boom that allows full angling of moldboards without chance of damage to tractor tires


  • Heavy duty square support stand with round base to prevent bending or sinking on wet ground


  • The blade is fully reversible, 1/2 x 6 inch high carbon grader-type steel cutting edge is reversible, featuring bevels on both edges for twice the work life, and replaceable for even greater functionality


  • Ditching and terracing jobs can be accomplished quickly and easily with manual tilt adjustment


  • Heavy duty moldboards are reinforced for maximum strength, and the curved design increases rigidity and improves material flow


  • The blade is versatile and can be used for landscaping, ditching, terracing, snow removal, dike building or backfilling


  • 360 degrees total swing angle


  • Optional end plates enable you to move bulk material, and optional adjustable skid shoes can be attached for when the blade is used for snow removal or barnyard clean-up so you can increase blade life and prevent gouging and damaging the work area


    • Blade Features

    Specifications

  • Designed for tractors up to 150 hp


  • Rugged construction for superior performance, extra long boom allows full angling of moldboard without the chance of damaging tractor tires


  • Ditching and terracing jobs can be accomplished quickly and easily with optional hydraulic tilt adjustment


  • Has 360 degree total swing angle


  • Blade comes standard with a parking stand for easier connecting and discconnecting the blade


  • NVHL-240XHD: 8 ft. wide rear blade with angle, tilt, and offset control, fits category 2 and 3 three point hitches, and quick hitches, for tractors from 90 to 150 hp, has 3 1/2 inch bottom kingpin and 4 inch top kingpin, 1/2 inch x 6 inch grader-type steel cutting edge is reversible, featuring bevels on both edges for twice the work life, and replaceable, PRICE LISTED HERE IS FOR BLADE ASSEMBLY AND FRAME, you will have to purchase either the hydraulic kits or mechanical linkages to complete the unit to control the angle, tilt, and offset functions, wt. is 1333 lbs. - Click the link below for current price, and/or to order


    • Order Form

  • NVHL-270XHD: 9 ft. wide rear blade with angle, tilt and offset control, fits category 2 and 3 three point hitches, and quick hitches, for tractors 90 to 150 hp draw bar ratings, has 3 1/2 inch king pin bottom, and 4 inch king pin on top on blade, 1/2 x 6 inch cutting edge top punched, swing is 32 inches right or left, moldboard completely reinforced, PRICE LISTED HERE IS FOR BLADE ASSEMBLY AND FRAME, you will have to purchase either the hydraulic kits or mechanical linkages to complete the unit to control the angle, tilt, and offset functions, wt. of blade is 1381 lbs. - Click the link below for current price, and/or to order


    • Order Form

  • NVHL-300XHD: 10 ft. wide rear blade with manual angle, tilt, and offset control, PRICE LISTED HERE IS FOR BLADE ASSEMBLY AND FRAME, you will have to purchase either the hydraulic kits or mechanical linkages to complete the unit to control the angle, tilt, and offset functions, all other features are the same as the 9 ft. model, wt. is 1432 lbs. - Click the link below for current price, and/or to order


    • Order Form

  • Accessories


  • The above blades require either ALL THREE HYDRAULIC KIT OPTIONS OR ALL THREE MECHANICAL LINKAGE OPTIONS OR A COMBINATION OF MECHANICAL AND HYDRAULIC KITS TO BE ABLE TO OPERATE. If you do not order either a hydraulic or mechanical control for each function, the blade will not stay in place; there are no pins to hold the position on the NVHL series blades.


  • Hydraulic Linkage Kits


  • Model LE1301125: Hydraulic angle cylinder kit - includes: 4 inch x 16 inch stroke cylinder with 2 inch shaft with two 8 ft. NPT (National Pipe Thread ends - no quick couplers), hydraulic hoses, wt. is 60 lbs. - Click the link below for current price, and/or to order


    • Order Form

  • Model LE1390117: Hydraulic offset cylinder kit - includes: 4 inch diameter x 16 inch stroke with 2 inch shaft with two 8 ft. NPT hydraulic hoses, wt. is 60 lbs. - Click the link below for current price, and/or to order


    • Order Form

  • Model LE1390118: Hydraulic tilt cylinder kit - includes: 3 1/2 inch diameter x 4 1/4 inch stroke with 1 1/2 inch diameter shaft with two 12 ft. long NPT hydraulic hoses, wt. is 40 lbs. - Click the link below for current price, and/or to order


    • Order Form

  • Mechanical Linkage Kits


  • Model BIC6400031: Mechanical linkage for the OFFSET FUNCTION on the blades - Click the link below for current price, and/or to order


    • Order Form

  • Model BIC6400032: Mechanical linkage for the ANGLE FUNCTION on the blades - Click the link below for current price, and/or to order


    • Order Form

  • Model BIC6400033: Mechanical linkage for the TILT FUNCTION on the blades - Click the link below for current price, and/or to order


    • Order Form

    Optional Tail Wheel Kit Shown With Single Tail Wheel, But Available As Double Tail Unit Wheel As Well
  • Model BIC6600001: Tailwheel kit for NVHL series blades (single wheel) - Click the link below for current price, and/or to order


    • Order Form

  • Model BIC6600002: Tailwheel kit for NVHL series (dual wheel) - Click the link below for current price, and/or to order


    • Order Form

  • You must purchase either the Mechanical Linkage Or Hydraulic Kit for the tailwheel to set the height or you will not be able to do so.


  • Model BIC6600031: Mechanical linkage for tailwheel on NVHL series - Price is $104.00 delivered, ships by UPS


    • Order Form

  • Model BIC6500041: Hydraulic kit for tailwheel on NVHL series blades, has 3 inch x 8 inch long hydraulic cylinder - Price is $419.00 delivered, ships by UPS


    • Order Form

    Skid Shoes For NVHL Series Blades
  • Model BIC6100003: Skid shoes per pair, wt. is 13 lbs. - Price is $52.00 delivered


    • Order Form

  • Model BIC6200004: End plates per pair, wt. is 62 lbs.


    • Order Form

    Click Here To Expand This To A Full Page Version

    Wikco.Com is a national equipment dealer selling directly to the end user
    To Order: Click On The Order Form Button Directly Below For Ordering And Payment Information


    Order Form

    Home Page/Index

    If Our Index Doesnot Appear On The Left Side Of This Page
    Then Click On The Home Button Above To See The Many Other Products We Sell

    For Sales or Technical Questions, Parts Information, Or To Check On An Order
    Please E-Mail us at: wikcocom@msn.com
    All information is on our web site at: www.wikco.com
    If you have additional questions,

    Click Here For Our Contact Information


    Wikco.com Inc.

    Copyright © Wikco.Com Inc., 1997 to present - All Rights Reserved, A U.S. Corporation