FBS752 Feller Buncher is universal skid steer mount, and has a 52 inch diameter cutting blade giving you a maximum tree cutting diameter of 20 inches. The unit is powered by your skid loaders hydraulic system; the T590 Hydraulic Motor requires a hydraulic system capable of 30-45 GPM. You will need to have a case drain connection on your hydraulic system; hydraulic hoses are included, couplers are not. The FBS752 Comes With Baumalight’s Auxiliary Electrical Connection; Required Live Pins – 4 Hot On AUX (Wire With Pin Supplied To AUX On Boom). When Ordering Unit, Please Note What Model Of Skid Steer It Is Going On & The Pin Connection. Baumalight Will Equip The Unit With Your Skid Steer’s Specific Auxiliary Connection Prior To Shipment.
A Control Box Kit Must Be Added If – Your Skid Steer Is Older And Does Not Have An Auxiliary Electrical Connection. Do You Have A Newer Bobcat Skid Steer With A Specific Bobcat 7-Pin Connector? To Run This Unit With Your Skid Steer, You Will Either Have To Add The Control Box Kit, Add The Bobcat 7-Pin CANBUS Plug/Circuit Board Kit, Or Contact Your Bobcat Dealer For A 7-Pin To 14-Pin Adapter.
FBS752 Feller Buncher, with Universal Skid mount, 52" Diameter Blade with gives you a 20" Max Cut (20" trunk diameter), the T590 Motor requires a hydraulic system that provides 30-45 GPM hydraulic flow
Feller Buncher For Skid Steer - The FBS752 Skidsteer Mounted Feller Buncher we designed features a 52” cutting disc that can take up to 20” trees and is equipped with 18 Beaver cutting teeth. The tower is build with 4×4 tubing to allow more visibility for the operator and high stress areas use AR400 steel for added strength.
It has an electric-over-hydraulic system which operates efficiently on hydraulic flows as little as 25 gpm and is powered by a bent axis piston motor. Only one set of remote hydraulics is required to operate all functions if you have an AUX electrical connection.
FBS752 Skid steer mounted Feller Buncher
Has Fixed 52 inch diameter horizontal mounted blade
Universal skid steer adapter mount
Maximum hydraulic pressure 4000 psi
Requires 12 volt electric - Four 12 volt positive switchable signals required
Wire supplied to AUX
Hoses are included, couplers are not included
20 inch maximum cut diameter
1 inch thick steel cutting blade
1 5/8 inch cutting thickness
Bolt on B8000 Beaver cutting teeth with 4 edges per tooth
Cutting blade has 18 teeth
Throat opening at teeth is 36 inches
What Is A Case Drain Line ?
On most skidsteer and excavator Hydraulic systems, Hydraulic motors and pumps require a case drain line. Sometimes referred to as a third line, the case drain line will relieve any excess pressure and drain it back to your return line, then into the reservoir. Without a properly installed case drain, that extra pressure could blow a seal or damage your hydraulic line. For higher flow motors or on piston and gear motors, a case drain line is always required. Although, no matter the size of your motor, a case drain is always a good idea as it will relieve the amount of pressure on your shaft seal, helping to prolong its life. A case drain line can also increase the efficiency of your hydraulic system as it will lower the back pressure on the tank line.
Since most machines have a unique style of coupler, BaumaLight does not include a coupler on our case drain line, although they are available. If your skidsteer is not equipped with a case drain, then it can be field installed.
How Important Is A Case Drain Line ? If we say having a case drain is critical and you operate without one, you will blow out your shaft seal. Be sure to check the motor sizing charts on our website.
Exception If You Have A Hammer Valve - There is one exception in the need for a case drain on gear motors and that is if you excavator is equipped with a hammer valve, this is a larger free flow line back to tank.
Identifying Your Case Drain Line - The following galleries show a highlighted case drain line on multiple skidsteer and excavator models.
*If you have a newer skid steer with auxiliary connection, please note what model of skid steer it is going on & the pin connection. Baumalight will equip the unit with your skid steer’s specific auxiliary connection prior to shipment. This Is The Ideal Solution. The operator can easily control all functions using the controls already equipped on the carrier joysticks. This allows the operator to never remove their hands from the controls to change a function.
Wired Control Box (Optional)
*If your skid steer is older & does not have an auxiliary electrical connection, you must add the WLD004956 wired control box. Although less than ideal, for controlling the attachment is using our wired control box. The operator would use the toggle switches on the control box to control the functions required. The wired control box requires a 12V connection to supply power.
Do You Have A Newer Bobcat Skid Steer With A Specific Bobcat 7-Pin Connector? - If so, you will either have to add the control box kit, the Bobcat 7-pin CANBUS plug/circuit board kit, or contact your Bobcat dealer for a 7-pin to 14-pin adapter.
Planer Tooth Style - The Planer style tooth feeds its appetite for brush bit by bit, taking small bites and providing the most efficient mulching and cutting. Although planer style teeth are efficient, their flat profile make them vulnerable to shattering on impact with rocks and other debris. For that reason, this style of tooth is recommended for cutting applications where efficiency is more important than tooth life. Planer teeth are bolt-on replaceable for quick and easy servicing and replacement even in the field.
Baumalight Tooth Holder For B8000 Series Tooth
Model FBS752-T590 skid steer mount feller buncher 20 inch diameter maximum cut, requires 30-45 gpm hydraulic flow - Click the link below for current price and availability
Wikco.Com is an equipment dealer selling directly to the end user
To Order: Click On The Order Form Button Directly Below For Ordering And Payment Information
If Our Index Does not Appear On The Left Side Of This Page Then Click On The Home Button Above To See The Many Other Products We Sell
For Sales or Technical Questions, Parts Information, Or To Check On An Order Please E-Mail us at: email@example.com
All information is on our web site at: www.wikco.com
If you have additional questions,