Tornado HD Series Heavy Duty Rotary Cutter

The Tornado HD Series Rotary Cutter is a three point hitch mount mower powered by your 50-100 hp tractor's 540 or 1000 rpm pto. The Tornado HD series brush mower mounts on your tractor's category 1 or 2 three point hitch. This heavy duty cutter is designed for cutting heavy brush in fields, ditches, along roadsides, and in other overgrown areas. Two free swinging blades mounted on a high carbon steel rotor will swing back if a heavy object is hit, reducing damage to the mower and object. The HD series is designed for heavy use, and is our most heavy duty series.

Click Here To Expand This To A Full Page Version

To See Other Products - Click Here To Go To Our Index

Tornado Heavy Duty Rotary Cutter
  • Features/Specifications


  • Cutting heights from 2 inches to 8 inches


  • Replaceble skids


  • Highly engineered and rugged gearbox


  • Heavy duty shielded pto shaft with slip clutch safety (1 3/8 inch ASAE, category 6 pto shaft)


  • Three point hitch linkage for either category I and II three point hitches


  • Floating top link


  • Front and rear protective chain guard


  • Exceptionally heavy duty 1/2 inch thick x 4 inch wide spring steel mower blades


  • High blade tip speed


  • Laminated tail wheel with tapered roller bearings size is 5 inches x 8 inches x 15 inches


  • Oval heavy duty stump jumper standard


  • Heavy duty 5/16 inch reinforced steel deck


  • Output shaft size from gearbox is 1.57 inches in diameter


  • Blade pin diameter is 1.5 inches


  • Maximum recommended brush/sapling/stump diameter that can be cut - 2.5 to 3 inches


  • Model RHD-472: 72 inch cutting width, 76 inches overall width, weight is 1025 lbs., rotor speed is 660 rpm, blade tip speed is 12,205 ft. per minute, 2 blades mounted on oval stump jumper - Click on the link below for a price quote


    • Order Form

  • Model RHD-484: 84 inch cutting width, 88 inches overall width, weight is 1200 lbs., rotor speed is 660 rpm, blade tip speed is 14,271 ft. per minute, 2 blades mounted on oval stump jumper - Click on the link below for a price quote


    • Order Form

    Click Here To Expand This To A Full Page Version

    Wikco.Com is a national equipment dealer selling directly to the end user
    To Order: Click On The Order Form Button Directly Below For Ordering And Payment Information


    Order Form   Home Page/Index

    If Our Index Does not Appear On The Left Side Of This Page
    Then Click On The Home Button Above To See The Many Other Products We Sell

    For Sales or Technical Questions, Parts Information, Or To Check On An Order
    Please E-Mail us at: wikcocom@msn.com
    All information is on our web site at: www.wikco.com
    If you have additional questions,

    Click Here For Our Contact Information


    Wikco.com Inc.

    Copyright © Wikco.Com Inc., 1997-present All Rights Reserved, A U.S. Corporation