Model HTB Tow Behind Hydraulically Driven Sweeper

Model HTB York Sweeper is designed to be towed behind a truck or tractor, and is good for use on large areas such as roadways, and parking lots. The model HTB can be used for clean-up and snow removal, and pavement contractors will use the HTB before sealing and repairing.

Click Here To Expand This To A Full Page Version

To See Other Products - Click Here To Go To Our Index

York HTB Tow Behind Sweeper
  • Features Model HTB Sweeper


  • Hydraulic Drive (Standard): Model HTB is equipped with a gerotor type hydraulic motor for smooth, reliable performance, York provides hydraulic hoses to the end of the pole


  • Angling: The model HTB is equipped with a manual angle adjustment which allows a maximum angle of 30 degrees left or right


  • Raise: Raise and lower functions are controlled by a lever and an adjustable spring chain float system


  • Tilt (Standard): Tilt is controlled by a ratchet handle


  • These functions can be converted to hydraulic operation using the mounting points provided and standard off-the shelf cylinders


  • The angle cylinder would be 2" x 16" and would be attached to the mounting points on the frame and the broom section


  • The raise/lower function can be hydraulically controlled in two different manners, you may either use a 2" x 12" cylinder to replace the lift lever and rod, or replace both links that attach to the broom swivel with 2" x 8" cylinders. In the first case the tilt function is then converted by replacing one of the same links with a 2" x 8" cylinder


  • Storage Stands (Standard): To protect the broom during maintenance and storage, the HTB has been equipped with a single point raise/lower stand on each side of the unit


  • Model HTB Optional Attachments: A model HT 10 ft. rake section may be alternated with the broom attachment for greater versatility; along with the rake section you may also choose to add a 2 ft. extension wing, or a 10 ft. sawtooth grader blade.


  • Hydraulic Drive Standard   Storage Standards Standard
    Broom Can Be Alternated With Rake Section

  • Specifications Model HTB York Broom


  • Frame: Made of structural steel, electrically welded, hitch type - pintle hitch


  • Broom: 8 ft. wide by 24 inches in diameter, number of brush sections - 50


  • Polypropylene convoluted wafers are standard, crimped wire or a 50/50 combination can be supplied at no additional cost


  • Broom Positions: Two each to the right or left to a maximum of 30 degrees


  • Drive: Gerotor type hydraulic motor, brush action can be reversed by switching hydraulic hoses


  • Hydraulic Requirements: 12-25 gpm, 1800-2250 psi, 180 degrees maxium allowable oil temperature (oil cooler may be required)


  • Weight: 1220 lbs.


  • Options: A 10 ft. rake section which may be alternated with the broom for greater versatility; a 2 ft. extension wing for the rake for greater reach; a 10 ft. sawtoothed grader blade which may be added along with the rake section.


  • Model 009208: Model 9208 York Broom, model HTB heavy duty tow-type broom, manual lift, angle and tilt, wt. 1220 lbs. - Click the link below for current price and to order


  • Order Form

    Tow Behind Hydraulic Drive Sweeper
  • Accessories


  • REPLACEMENT 8 FT. BRUSH SECTIONS FOR HTB SWEEPER


  • Model 09992280: 8 ft. wide, 24 inch diameter all poly brush set with 50 convoluted poly brush sections -Click the link below for current price and to order


  • Order Form

  • Model 09992380: 8 ft. wide, 24 inch diameter all wire brush set with 50 convoluted wire brush sections - Click the link below for current price and to order


  • Order Form

  • Model 09992480: 8 ft. wide, 24 inch diameter 1/2 poly, 1/2 wire brush set with 26 convoluted poly brush sections and 24 convoluted wire brush sections - Click the link below for current price and to order


  • Order Form

  • Model 009044: 10 ft. wide rake section, fits in place of broom on HT frame - Click the link below for current price and to order


  • Order Form

  • Model 000380: 10 ft. saw tooth grader blade, an accessory for rake section option above - Click the link below for current price and to order


  • Order Form

  • Model 000922: 2 ft. rake extension, an accessory for rake section option above - Click the link below for current price and to order


  • Order Form

  • Optional Deflectors For 8 ft. Brooms


  • Part 000918: Rubber broom deflector 8 ft. wide - Click the link below for current price and availability


  • Order Form

  • Top Metal Deflectors
  • Part 000928: Top metal deflector 8 ft. wide - Click the link below for current price and availability


  • Order Form

  • Sprinkler Systems - To Fit Model HTB


  • Model 000930: Tank, 25 gallon - Click the link below for current price and availability


  • Order Form

  • Model 000938: 8 ft. spray system, kit includes pump, hose, nozzles, and mounting hardware (does not include tank, order tank separately above), wt. 26 lbs. - Click the link below for current price and availability


  • Order Form

  • Hydraulic Systems


  • Model 000970: Independent hydraulic system for use on units with inadequate hydraulics. Unit is driven by the 540 rpm pto, unit Includes: tank, pump, filter and 3 pt. hitch frame, customer must supply hoses between the unit and the broom, wt. 175 lbs. - Click the link below for current price and availability


  • Order Form

    Click Here To Expand This To A Full Page Version

    Wikco.Com is a national equipment dealer selling directly to the end user
    To Order: Click On The Order Form Button Below For Ordering And Payment Information


    Order Form

    Home Page/Index

    If Our Index Does not Appear On The Left Side Of This Page
    Then Click On The Home Button Above To See The Many Other Products We Sell

    For Sales or Technical Questions, Parts Information, Or To Check On An Order
    Please E-Mail us at: wikcocom@msn.com
    All information is on our web site at: www.wikco.com
    If you have additional questions,

    Click Here For Our Contact Information


    Wikco.com Inc.

    Copyright Wikco.Com Inc., 1997 to present - All Rights Reserved, A U.S. Corporation