Hurricane H40 Series Flail Mowers
The Hurricane H40 Series Flail Mowers are high quality flail mowers which will allow you to cut large areas efficiently with less manpower, and give you the finish cut you need for parks and recreation areas, fairways, athletic fields, and large acreages with good quality turf. The many quality engineered features on these tractor mounted flail finishing/grooming mowers will give you many hours of use without maintenance or repair. The H40 series flail mower is available in cutting widths of 48 inches, 60 inches, and 72 inches, and is designed to be powered from the 540 rpm pto of tractors with 15-40 hp. The H40 series mowers are mounted offset to the right of center on the hitch as follows: H40-48 three inches; H40-060 eight and one half inches; H40-072 six and one half inches.
To See Other Products - Click Here To Go To Our Index
- Features/Specifications
- Cutting heights from 1 inch to 5 inches
- Choice of fine cut knives at 90 degree angles, or reversible Y blades, or one piece paddle blades available at no extra charge, one piece hammer type blades available for extra charge
- Dethatching blades available
- High blade tip speed
- Has precise blade overlap
- Adjustable cutting height roller with scraper
- These mowers can be used for the best finish cut, and for heavy weeds, and small branches no more than 1/2 inches and twigs
- Flai mowers offer a good alternative when safety is a concern (no side discharge of rocks or other objects)
- Heavy duty shielded PTO shaft (1 3/8 inch ASAE cat 3)
- Sealed rotor bearings
- Can be mounted on the front or rear of tractors
- Electronically balanced rotor
- Heavy duty, one piece, balanced steel pulleys
- 2 Heavy duty reinforced notched belts
- Automatic belt tensioner
- 3 point linkage, cat 1
- Floating top link
- Units are mounted offset to the right on the hitch as follows: 3 inches on H40-048; 8.5 inches on H40-060; 6.5 inches on H40-072
- Highly engineered gearbox with cooling fins
- Model H40-048: 48 inch cutting width, 54 inch overall width, 418 lbs., (440 lbs. shipping weight), rotor rpm of 2278, blade tip speed of 8917 ft./minute, has 48 blades - Click the link below for current price and/or to order
- Model H40-060: 60 inch cutting width, 66 inch overall width, 456 lbs., (480 lbs. shipping weight), rotor rpm of 2278, blade tip speed of 8917 ft./minute, has 64 blades - Click the link below for current price and/or to order
- Model H40-072: 72 inch cutting width, 78 inch overall width, 528 lbs. (563 lbs. shipping weight), rotor rpm of 2278, blade tip speed of 8917 ft./minute, has 76 blades - Click the link below for current price and/or to order
- Optional Equipment
- These items are available when ordering a new mower
- Part No. 009-9560: To Upgrade To Drive line with overrunning clutch, order in drop down menu on order page
- Part No. 009-9507: Optional side skids per pair, order in drop down menu with new unit
- Part NO. 009-9200: One piece hammer type blades instead of any of the two/three piece choices for H40-048
- Part No. 009-09201: One piece hammer type blades instead of any of the two/three piece choices for H40-060
- Part No. 009-9202: One piece hammer type blades instead of any of the two/three piece choices for H40-072
Click Here To See The Flail Mowers In Operation (DSL connection version)
Click Here To See The Flail Mowers In Operation (Dial-Up connection version)
Wikco.Com is an equipment dealer selling directly to the end user
To Order: Click On The Order Form Button Directly Below For Ordering And Payment Information
If Our Index Does not Appear On The Left Side Of This Page
Then Click On The Home Button Above To See The Many Other Products We Sell
For Sales or Technical Questions, Parts Information, Or To Check On An Order
Please E-Mail us at: wikcocom@msn.com
All information is on our web site at: www.wikco.com
If you have additional questions, Click Here For Our Contact Information
Wikco.com Inc.
Copyright © Wikco.Com Inc., 1997 to present - All Rights Reserved, A U.S. Corporation