QC And TX Series Towable Generators - High Quality, Made in Canada.

The QC And TX Series Portable, Towable Generators can be used as back-up power generators for your farm, shop, or farmstead, or for industrial and farm use for locations where power isn't available. Many different capacities are available; both series have control panels equiped with 20 amp capacity duplex receptacle (for plugging in 4 standard 110v cords), and one 50 amp welder receptacle. All units also have a voltage meter visible from the tractor seat. The units come mounted on their own trailer, but can be removed and mounted permanently on their mounting plate. These units are designed and built tough enough for 24 hour a day / 7 days a week usage.

Please review the Principles Chart on this page. This chart gives you the voltage of the generator; make sure you know the voltage your motors are wired for, as industrial motors can be 208 or 240 depending upon your area, most residential areas are 120/240 volts. There are some high voltage industrial motors wired for 277/480 and some 347/600; again make sure you know how they are currently wired so you can choose the correct model.

Click Here To Expand This To A Full Page Version

To See Other Products - Click Here To Go To Our Index

QC And TX Series Portable PTO Powered Generators
QC Series Portable Generators

TX Series Portable Generators

  • Please Note: Minimum required horsepower ratings shown for any generator is the MINIMUM PTO HP REQUIRED WHEN THE GENERATOR IS AT MAXIMUM LOAD/CAPACITY. If your tractor has less pto hp than the minimum required, then you won't be able to use the generator at full load. We do have both the QC and TX series however with the differences between the two explained below. The smallest TX series however only requires 11 pto hp minimum.


  • Two different series of pto generators are available - The QC Series listed directly below and the TX Series at the bottom of the page. The QC series generators have one of the most precise automatic voltage requlators in the industry at + or - 1 percent. Use the QC generators at your business if you need to run electronic equipment which cannot handle high voltage flucuations.


  • We also have the TX series generators listed at the bottom of the page. These units are less expensive because of standard type voltage regulator used; while not recommended for the application explained above, these lower cost generators are perfect for operation welders and other tools and equipment that are not as sensitive to voltage flucuations. The TX series are comparable in that respect to other generators on the market.


  • PTO SHAFTS INCLUDED WITH ALL MODELS


  • Features/Specifications - QC Series Generators



    • Voltage And Amp Specifications QC Generators


  • Units have a convenient reset circuit breaker to prevent short circuit damage


  • Brushless style eliminates the need for tedious repairs


  • Units use copper windings


  • Sheilded power shaft for maximum operator safety


  • Mounting base for use on trailer or can be used for permanent installation


  • Has full load connector with lockable cover


  • Voltage meter is visible from the tractor seat


  • Warranty is less of 2 year/2000 hours


  • Generator turns at a low 1800 rpm, and uses oversized windings to enhance stability


  • Speed indicating lights are highly visible from the tractor seat


  • Control panel has automatic voltage regulation (plus or minus 1 percent down to 56 Hz), and high momentary surge approximately 3 times (on most sizes) the rated continuous capacity for superior motor starting ability


    • Portable Emergency Power When You Need It   Portable Emergency Power When You Need It
  • Designed for 24 hour a day / 7 days a week operation


    • QC Series Control Panel

    Power Generation Chart For QC Series Generators

  • Here is how the QC series models are wired


  • QC = single phase (Dedicated)


  • QC-2 = 3-phase (Parallel Low WYE) 120/208


  • QC-3 = 3-phase (Series High Delta) 120/240


  • QC-4 = 3-phase (Series High WYE) 277/480


  • QC-6 = 3-phase (Dedicated) 347/600


  • Model WLQC12: Trailer mounted, pto powered generator, minimum pto hp required approximately 24, includes pto shaft and 10 ft. cord with Anderson connectors, 120/240 volts, requires 540 rpm, produces 12 kw (kilowats), wt. is 592 lbs. - Click the link below for a price quote and availability


    • Order Form

  • Model WLQC19: Same as above but produces 19 kw has 540 rpm gearbox, minimum pto hp required is 34, wt. is 678 lbs., 1000 rpm gearbox is available if needed - Click the link below for a price quote and availability


    • Order Form

  • Model WLQC30: Same as above but produces 30 kw has 540 rpm gearbox, minimum pto hp required is 49 - Click the link below for a price quote and availability


    • Order Form

  • Model WLQC45: Same as above but produces 45 kw, has 540 rpm gearbox, minimum pto hp required is 75; 1000 rpm gearbox is available - Click the link below for price quote and availability


    • Order Form

  • Model WLQC55: Has 120/240 volts as above, choice of either 540 rpm or 1000 rpm gearbox - specify at time of order, minimum pto hp required is 89, produces 55kw, wt. is 1037 lbs. - Click the link below for a price quote and availability


    • Order Form

  • Model WLQC65: Has 120/240 volts as above, choice of either 540 rpm or 1000 rpm gearbox - specify at time of order, produces 65 kw, minimum pto hp required is 102, wt. is 1084 lbs. - Click the link below for price quote and availability


    • Order Form

  • Model WLQC80: Has 120/240 volts, 1000 rpm gearbox only, minimum pto hp required is 122, produces 80 kw, wt. is 1335 lbs. - Click the link below for a price quote and availability


    • Order Form

  • Model WLQC100: Has 120/240 volts, 1000 rpm gearbox only, produces 100 kw, minimum pto hp required (to run generator at full load) is 153, wt. is 1485 lbs. - Click the link below for a price quote and availability


    • Order Form

  • Model WLQC50-6: Three phase 377/600 volt models, choice of either 540 or 1000 rpm gearbox, minimum pto hp required is 80 hp, produces 50 kw, wt. is 1010 lbs. - Click the link for price quote and availability


    • Order Form

  • Model WLQC75-6: Three phase 377/600 volt models, 1000 rpm gearbox only, produces 75 kw, minimum pto hp required is 110 hp, wt. is 1175 lbs. - Click the link below for price quote and availability


    • Order Form

  • Model WLQC100-6: Three phase 377/600 volt models, 1000 rpm gearbox only, produces 100 kw, minimum pto hp required is 153, wt. is 1474 lbs. - Click the link below for price quote and availability


    • Order Form

  • All Reconnectable Units Listed Below Can Put Out 120/240 Single Phase, 120/240 Three Phase, 120/208 Three Phase And 277/480 Three Phase


  • Model WLQC105-2: Reconnectable model, 1000 rpm gearbox only, produces 105 kw, minimum hp required is 155, wt. is 1474 lbs. - Click the link below for a price quote and availability


    • Order Form

  • Model WLQC68-2: Reconnectable model, choice of either 540 or 1000 rpm gearbox, produces 45 kw, minimum pto hp required is 105, wt. is 1094 lbs. - Click the link below for price quote and availability


    • Order Form

  • Model WLQC45-2: Reconnectable model, choice of 540 or 1000 rpm gearbox, produces 45 kw, minimum pto hp required is 75, wt. is 957 lbs. - Click the link below for a price quote and availability


    • Order Form

  • Model WLQC30-2: Reconnectable model, 540 rpm gear box only, produces 30 kw, minimum pto hp required is 49, wt. is 779 lbs. - Click the link below for a price quote and availability


    • Order Form

  • Model WLQC30-3: 540 rpm gearbox only, produces 30 kw, 120/240 volt, minimum pto hp required is 49, wt. is 779 lbs. - Click the link below for a price quote and availability


    • Order Form

  • Model WLQC45-3: 540 rpm gearbox only, produces 45 kw, 120/240 volt, minimum pto hp required is 75, wt. is 980 lbs. - Click the link below for a price quote and availability


    • Order Form

  • Model WLQC68-3: 540 rpm gearbox only, produces 65 kw, 120/240 volt, minimum pto hp required is 105, wt. is 1159 lbs. - Click the link below for price quote and availability


    • Order Form

  • Model WLQC105-3: 1000 rpm gearbox only, produces 105 kw, 120/240 volt, minimum pto hp required is 155, wt. is 1474 lbs. - Click the link below for a price quote and availability


    • Order Form

    277/480 Volt Models

  • Model WLQC30-4: 540 rpm gearbox only, produces 30 kw, 277/480 volt, minimum pto hp required is 49, wt. is 779 lbs. - Click the link below for a price quote and availability


    • Order Form

  • Model WLQC45-4: 540 rpm gearbox only, produces 45 kw, 277/480 volt, minimum pto hp required is 75, wt. is 980 lbs. - Click the link below for a price quote and availability


    • Order Form

  • Model WLQC68-4: 540 rpm gearbox only, produces 68 kw, 277/480 volt, minimum pto hp required is 105, wt. is 1159 lbs. - Click the link below for a price quote and availability


    • Order Form

  • Model WLQC105-4: 1000 rpm gearbox only, produces 105 kw, 277/480 volt, minimum pto hp required is 155, wt. is 1474 lbs. - Click the link below for a price quote and availability


    • Order Form

  • TX Series Trailer Mounted PTO Powered Generators

    • TX Series Trailer Mounted Generators

  • Features/Specifications


  • Trailer mounted models are all single phase 120/240 volt units, powered by your tractor's 540 rpm pto, requiring tractors with 11 to 50 hp depending upon the model


  • Full load connector with lockable cover


  • Voltage meter that is visible from the tractor


  • 20 amp duplex recepticle (can plug in 4 standard 110 volt cords), and on 50 amp welder receptacle


  • Generators have a warranty of less of 2 years or 2000 hours


  • High quality generators made in Canada


  • High speed 3600 rpm generator motor


  • 2 times surge (limitied motor starting ability


  • Self-regulation (plus or minus 6 percent)


    • TX Series Generator Control Panel   TX Series Voltage Meter
    Model Specification Chart - TX Series Generators

  • All prices include trailer, pto shaft, and 10 ft. cord with Anderson connectors


    • TX Series Trailer Generators   TX Series Trailer Generators
    TX Series Trailer Generators   TX Series Trailer Generators
  • Model WLTX7000: TX series trailer generator, 120/240 volts, pto powered 540 rpm gearbox, produces 7kw or 7,000 watts, minimum pto hp required is 11, wt. is 300 lbs. - Click the link below for a price quote and availability


    • Order Form

  • Model WLTX12000: TX series trailer generator, 120/240 volts, pto powered 540 rpm gearbox, produces 12 kw or 12,000 watts, minimum pto hp required is 21, wt. is 348 lbs. - Click the link below for a price quote and availability


    • Order Form

  • Model WLTX18000: TX series trailer generator, 120/240 volts, pto powered 540 rpm gearbox, produces 18.5 kw or 18,500 watts, minimum pto hp required is 34, wt. is 430 lbs. - Click the link below for a price quote and availability


    • Order Form

  • Model WLTX25000: TX series trailer generator, 120/240 volts, pto powered 540 rpm gearbox, produces 25 kw or 25,000 watts, minimum pto hp required is 42, wt. 490 lbs. - Click the linke below for price quote and availability


    • Order Form

  • Model WLTX31000: TX series trailer generator, 120/240 volts, pto powered 540 rpm gearbox, produces 31 kw or 31,000 watts, minimum pto hp required is 50, wt. is 520 lbs. - Click the linke below for price quote and availability


    • Order Form

    List Of Output Of Common Appliances And Equipment

    List Of Output Of Common Appliances And Equipment

    List Of Output Of Common Appliances And Equipment

    List Of Output Of Common Appliances And Equipment


  • Additional Generator Application Information:

  • These pto generators are designed to give you the peak output levels listed when your pto is rotating at 540 rpm. If your tractor has a tachometer FOR THE PTO SHAFT then set your tractor at the throttle setting you want to run it at and measure the pto speed. You need to use enough throttle to keep the pto at 540 rpm so the generator will keep the voltage at 110 or 220 so you can operate the motor the generator is powering. If your tractor meets the minimum horsepower requirement or more, that we recommend for each generator, and you keep your pto speed at 540 rpm, you will get the performance and wattage output as shown. Farm tractors are normally designed to be operated at full throttle under load, but if not sure, check in your owners manual.


  • If you have an application where the start-up load on the motor is more than approximately 2.5 times the constant wattage then you definately need to be at the minimum recommended horsepower or higher, and as explained below, you may want to consider using the QC series generator


  • There are two series of the generators the TX and QC. The TX series are great for use for running irrigation equipment and farm equipment including welders or general emergency power for your shop or home. The TX series has a regulator to keep you within + or - 6 percent of minimum required voltage. Using this regulator makes the units less expensive and are great for industrial use in most applications.


  • The QC series uses a regulator to keep you within + or - 1 percent of minimum required voltage. The QC units are more expensive, but are required when using this for a backup power source at an office when you will connect computers and other sensitive electronic equipment. You may also want the QC series if the start-up load on the motor is over 2.5 times the constant wattage required, as the QC generators with this regulator are more efficient.


    • Click Here To Expand This To A Full Page Version

    Wikco.Com is a national equipment dealer selling directly to the end user
    To Order: Click On The Order Form Button Directly Below For Ordering And Payment Information


    Order Form

    Home Page/Index

    If Our Index Doesnot Appear On The Left Side Of This Page
    Then Click On The Home Button Above To See The Many Other Products We Sell

    For Sales or Technical Questions, Parts Information, Or To Check On An Order
    Please E-Mail us at: wikcocom@msn.com
    All information is on our web site at: www.wikco.com
    If you have additional questions,

    Click Here For Our Contact Information


    Wikco.com Inc.

    Copyright © Wikco.Com Inc., 1997 to present - All Rights Reserved, A U.S. Corporation