Ground Hog Two Man Earth Auger/Post Hole Diggers

The Ground Hog Two Man Earth Auger/Post Hole Diggers have been tried and tested for over 30 years and use Ground Hog's time tested transmission. The straight forward design creates durability and requires very little maintenance. The C-71-5 series two man earth auger comes equipped with a centrifugal clutch and finger operated return-style throttle for reliability and ease of operation, and is also equipped with a stop switch at both operation locations for maximum operator safety. The transmission incorporates Timken tapered roller bearings for years of trouble-free service. The transmission uses a 7/8 inch square drive output shaft.


Two Man Post Hole Digger/Earth Auger Available With Either Briggs Or Honda Engine
  • Features/Specifications


  • Two man earth auger well balanced with heavy duty handle bars


  • Time tested transmission, efficient, worm drive transmission with high quality Timken roller bearings and heavy duty industrial cog-type drive belt


  • Transmission output shaft is 7/8 inch square auger drive


  • Centrifugal clutch with all metal shoes and drum with needle bearings


  • Trigger-type return style throttle, with a stop switch on handle bars at both operator positions


  • Easily diggs with a 12 diameter auger, and will handle the hardest soils


  • Briggs and Stratton and Honda engine options available


  • Auger speed is 180 rpm@3600 engne rpm (no load)


  • Approximately 150 ft. lbs. of torque


    • Two Man Unit In Use, Easily Drives A 12 Inch Auger In The Hardest Soils

    Power Heads

  • Model GHC-71-5IC: Two man earth auger (power head only, see below for auger bits), powered by a 5 HP Briggs And Stratton I/C Intek engine, 180 rpm at output shaft, uses 7/8 inch square output shaft, wt. is 60 lbs. - Click link below for current price, and/or to order


    • Order Form

  • Model GHC-71-5H: Two man earth auger (power head only, see below for auger bits), powered by a 5 HP Honda engine, 180 rpm at output shaft, uses 7/8 inch square output shaft, wt. is 60 lbs. - Click link below for current price, and/or to order


    • Order Form

    Accessories

  • Optional Available Earth Augers


    • Combo Series Auger Bits For Hard Soils Available In Diameters From 6 To 12 Inches, Auger Length Is 38 Inches
  • Model GHPSD6: 6 inch diameter combo style auger bit, 38 inches long, wt. is 16 lbs. - Click on the link below for price, information, and to order


    • Order Form

  • Model GHPSD7: 7 inch diameter combo style auger bit, 38 inches long, wt. is 19 lbs. - Click on the link below for price, information, and to order




    • Order Form

  • Model GHPSD8: 8 inch diameter combo style auger bit, 38 inches long, wt. is 24 lbs. - Click on the link below for price, information, and to order


    • Order Form

  • Model GHPSD9: 9 inch diameter combo style auger bit, 38 inches long, wt. is 25 lbs. - Click on the link below for price, information, and to order




    • Order Form

  • Model GHPSD10: 10 inch diameter combo style auger bit, 38 inches long, wt. is 29 lbs. - Click on the link below for price, information, and to order


    • Order Form

  • Model GHPSD12: 12 inch diameter combo style auger bit, 38 inches long, wt. is 31 lbs. - Click link below for current price, and/or to order


    • Order Form

  • Other Accessories


  • Shaft Extensions


  • Model GHEX1: 12 inch long extension shaft, for 7/8 inch square drive augers, wt. is 5 lbs. - Click link below for current price, and/or to order


    • Order Form

  • Model GHEX2: 24 inch long extension shaft, for 7/8 inch square drive augers, wt. is 8 lbs. - Click on the link below for price, information, and to order


    • Order Form

  • Model GHEX3: 36 inch long extension shaft, for 7/8 inch square drive augers, wt. is 12 lbs. - Click on the link below for price, information, and to order


    • Order Form

  • Model GHEX4: 48 inch long extension shaft, for 7/8 inch square drive augers, wt. is 15 lbs. - Click on the link below for price, information, and to order


    • Order Form

  • Other Accessories


  • Auger Replacement Teeth And Point


    • Standard Mild Steel Replacement Tooth For Combo Auger
  • Part No. 35: Standard steel Wisdom Tooth style replacement auger blade - Click on the link below for price, information, and to order


    • Order Form

    Hard Faced Replacement Tooth For Combo Auger
  • Part No. 35HF: Hard faced Wisdom Tooth style replacement auger blade, has greater abrasion resistance in hard soil than standard 35 above

    Click on the link below for a price quote


    • Order Form

    Carbide tipped Wisdom Tooth Style Replacement Auger Blade For Longest Life In Hard Soils

  • Part No. 1336: Carbide tipped Wisdom Tooth style replacement auger blade, has the greatest abrasion resistance and is longest lasting tooth, can be used in combination with the standard or hardfaced teeth (use the carbide tooth in the outside tooth position)

    Click on the link below for price, information, and to order


    • Order Form

    Screw In Pilot Point Used On Combo Series Augers
  • Part No. 100: Screw in pilot point used on combo series augers - Click on the link below for price, information, and to order


    • Order Form

  • Display Stand


    • Display Stand (Photo shows display stand to hold power head when not in use, and up to 3 auger bits)
  • Model GHDS3: Display Stand to hold power head and up to three auger bits when unit isnot in use, wt. is 15 lbs. - Click on the link below for price, information, and to order


    • Order Form

    Click Here To Expand This To A Full Page Version

    Wikco.Com is a national equipment dealer selling directly to the end user
    To Order: Click On The Order Form Button Directly Below For Ordering And Payment Information.


    Order Form

    Home Page/Index

    If Our Index Doesnot Appear On The Left Side Of This Page
    Then Click On The Home Button Above To See The Many Other Products We Sell

    For Sales or Technical Questions, Parts Information, Or To Check On An Order
    Please E-Mail us at: wikcocom@msn.com
    All information is on our web site at: www.wikco.com
    If you have additional questions,

    Click Here For Our Contact Information



    Or Fax us at 520-316-0446

    Wikco.com Inc.

    Copyright © Wikco.Com Inc., 1997 to present - All Rights Reserved, A U.S. Corporation