Ground Hog One Man Earth Drill

The Ground Hog One Man Engine Powered Hydraulic Earth Drill is designed to put the power of a two man machine in the hands of one. The unique right-angle design minimizes operator fatigue by eliminating torque kick-back to the operator. This unit is setting the industry standard with features such as a 7/8 inch square drive, tubular drive shaft, and tested gearbox. Heavy gauge steel is used throughout the machine as well as Timken tapered roller and ball bearing, to produce a durable, low maintenance, and high quality piece of equipment that you would expect from the Ground Hog Brand.

Click Here To Expand This To A Full Page Version

To See Other Products - Click Here To Go To Our Index

Model 1M5C Ground Hog One Man Earth Drill   Model HD99 Ground Hog Heavy Duty One Man Earth Drill


  • Features/Specifications


  • Model 1M5C Ground Hog One Man Earth Drill

    Model 1M5C Ground Hog One Man Earth Drill


  • Model 1M5C is equipped with a centrifugal clutch and all operating controls are located on the handlebars for the operator's convenience


  • The handlebars swing to three positions for: normal drilling; close up drilling; and ease of moving the unit at the job site with the auger attached.


  • Highway rated tires and wheels


  • Powder coated for a durable finish


  • Tubular steel drive shaft


  • Low maintenance


  • Easy to manuever on rough or soft terrain


  • 7/8 square auger drive


  • Light weight


  • improved digging head bushings


  • No torque to operator


  • Easy to use operator controls


  • Ground Hog's time tested transmission


  • Easy to load into truck or trailer


  • Easily digs with a 12 inch auger


  • Will handle the hardest soils


  • Auger speed is 180 rpm @ 3600 engine rpm (at no load)


  • Approximately 150 ft. lbs. torque


  • Powered by a high quality Honda engine


  • Unit weight is 195 lbs. (without an auger bit)


  • Length: normal drilling - 82 inches; close-up dilling and transport 73 inches


  • Model GH1M5C-H: Ground Hog brand, one man earth drill, powered by a 5.5 hp Honda engine, which powers the hydraulic motor that powers the auger bits, wt. is 195 lbs., price listed is for earth drill only, DOES NOT include any auger bits (see below for available bits) - Click on the link below for current price, and/or to order


  • Order Form

    Model HD99 Heavy Duty One Man Earth Drill

    Ground Hog One Man Earth Drill Model HD99

    Ground Hog One Man Earth Drill Model HD99


  • Hd99 features include: variable speed; forward and reverse auger rotation


  • Three handlebar positions - two for normal drilling and one for close up drilling and towing


  • Drilling head pivots from side to side for drilling on uneven terrain


  • No torque is transfered to the operator making for less fatigue drilling


  • Engine frame swivels to keep engine level for optimum performance
  • Replaceable steel bushings at pivot points


  • Auger locks up out of the way for easy maneuvering


  • Durable powder coated paint finish


  • Large 5.70 x 8 pneumatic highway rated tires for easy maneuvering and towing


  • Unit is towable to jobsite, includes towbar with 2 inch ball hitch


  • Auger drive is 7/8 inch square for durability under heavy use


  • Powered by a 9 hp Honda engine that powers the hydraulic motor to give you 275 lbs. of torque and turns the auger bits at a speed of 140 rpm (maximum), hydraulic pump/motor is rated at 6 gpm


  • High pressure hydraulic swivels for free movement and longer hose life


  • Hoses protected within the drill frame


  • Unit weight is 295 lbs. with fluids


  • Length of unit is 100 inches with normal drilling, close drilling and towing positions 75 inches long, width is 34 inches, height is 38 inches


  • Model GHHD99-H: One man hydraulic earthdrill powered by a 9 hp Honda engine - Click on the link below for current price, and/or to order




  • Order Form

    Accessories

    Available Bits - Available from 2 Inches To 18 Inches In Diameter, All Are 36 Inches Long, Also Listed Are Available Extensions, Items Available For Both Drill Models

    Pengo Auger Bits Available For Earth Drills (2 Inches To 18 Inches In Diameter)

    Pengo Point


  • Model GHPSD2: 2 inches in diameter x 36 inches long auger bit with 7/8 inch square drive, Pengo Series bit, wt. is 12 lbs. - Click the link below for prices on all the GPHSD auger bits, and extensions


  • Order Form

  • Model GHPSD4: 4 inches in diameter x 36 inches long auger bit with 7/8 inch square drive, Pengo Series bit, wt. is 14 lbs. - Click the link below for prices on all the GPHSD auger bits, and extensions


  • Order Form

  • Model GHPSD6: 6 inches in diameter x 36 inches long auger bit with 7/8 inch square drive, Pengo Series bit, wt. is 16 lbs. - Click the link below for prices on all the GPHSD auger bits, and extensions


  • Order Form

  • Model GHPSD7: 7 inches in diameter x 36 inches long auger bit with 7/8 inch square drive, Pengo Series bit, wt. is 16 lbs. - Click the link below for prices on all the GPHSD auger bits, and extensions


  • Order Form

  • Model GHPSD8: 8 inches in diameter x 36 inches long auger bit with 7/8 inch square drive, Pengo Series bit, wt. is 22 lbs. - Click the link below for prices on all the GPHSD auger bits, and extensions


  • Order Form

  • Model GHPSD9: 9 inches in diameter x 36 inches long auger bit with 7/8 inch square drive, Pengo Series bit, wt. is 25 lbs. - Click the link below for prices on all the GPHSD auger bits, and extensions


  • Order Form

  • Model GHPSD10: 10 inches in diameter x 36 inches long auger bit with 7/8 inch square drive, Pengo Series bit, wt. is 28 lbs. - Click the link below for prices on all the GPHSD auger bits, and extensions


  • Order Form

  • Model GHPSD12: 12 inches in diameter x 36 inches long auger bit with 7/8 inch square drive, Pengo Series bit, wt. is 32 lbs. - Click the link below for prices on all the GPHSD auger bits, and extensions


  • Order Form

  • Model GHPSD14: 14 inches in diameter x 36 inches long auger bit with 7/8 inch square drive, Pengo Series bit, wt. is 35 lbs. - Click the link below for prices on all the GPHSD auger bits, and extensions


  • Order Form

  • Model GHPSD16: 16 inches in diameter x 36 inches long auger bit with 7/8 inch square drive, Pengo Series bit, wt. is 38 lbs. -Click the link below for prices on all the GPHSD auger bits, and extensions


  • Order Form

  • Model GHPSD18: 18 inches in diameter x 36 inches long auger bit with 7/8 inch square drive, Pengo Series bit, wt. is 43 lbs. - Click the link below for prices on all the GPHSD auger bits, and extensions


  • Order Form

    Extensions

  • Model GHEX1: 1 ft. long extension shaft, wt. is 2 lbs. - Click the link below for prices on all the GPHSD auger bits, and extensions


  • Order Form

  • Model GHEX2: 2 ft. long extension shaft, wt. is 2 lbs. - Click the link below for prices on all the GPHSD auger bits, and extensions


  • Order Form

  • Model GHEX3: 3 ft. long extension shaft, wt. is 2 lbs. -Click the link below for prices on all the GPHSD auger bits, and extensions


  • Order Form


    Click Here To Expand This To A Full Page Version

    Wikco.Com is a national equipment dealer selling directly to the end user
    To Order: Click On The Order Form Button Directly Below For Ordering And Payment Information.


    Order Form

    Home Page/Index

    If Our Index Doesnot Appear On The Left Side Of This Page
    Then Click On The Home Button Above To See The Many Other Products We Sell

    For Sales or Technical Questions, Parts Information, Or To Check On An Order
    Please E-Mail us at: wikcocom@msn.com
    All information is on our web site at: www.wikco.com
    If you have additional questions,

    Click Here For Our Phone Number


    Wikco.com Inc.


    Copyright Wikco.Com Inc., 1997 to present - All Rights Reserved, A U.S. Corporation