We have several models of lower cost imported models of rim clamp tire changers. Several models are available however, from your basic models designed for most passenger car wheels, to more sophisticated models designed to let you change low profile tires on wide low profile rims. These rims usually don't have much "drop" in the rim and are hard to change. Several of the models designed for these wheels have advanced features such as hands-free tire changing and include two assist arms to help change these stiff sidewall, low profile tires.
Model TC-430 economy automotive wheel tire changer
This is a bare bones model so that everyone can afford a swing arm style tire changer, it has your basic features to get the job done
Swing arm design
Manual operation of mount/demount tool
Four pneumatic wheel clamps powered by double acting air cylinders
Has side mounted, air powered bead breaker
Air system includes water separator, lubricator, and pressure regulator
Maximum wheel diameter that will fit on table top is 37 4/5 inches
Maximum wheel width is 3 inches to 11 inches
Rim diameters you can have when clamping on the inside of the rim are 12 to 21 inches
Rim diameters you can have when clamping on the outside (edge of rim) are 10 to 18 inches
Tire changer is powered by standard 110 volts (powers turntable), clamps and beadbreaker are operated by air
Model TC-430: Economy, automotive wheel, rim clamp style tire changer - Click the link below for current price and availability
Options - Model TC-430
Model TC-MC-A: Set of 4 tall clamps (motorcycle or atv) for the model TC-430 tire changer, wt. is approximately 4 lbs. - Click the link below for current price and availability
Features/Specifications
Model TC-530 Rim Clamp Style Semi-Automatic Automotive Tire Changer
This model is a great machine for a small shop on a tight budget
Swing arm style
Manual operation of mount/demount tool
Four pneumatic clamps and double acting cylinders
Side mounted bead breaker
Bead seating inflation jets are integrated in the clamping jaws insuring quick and safe inflation
Includes water separator, lubricator, and air pressure regulator
Maximum wheel diameter machine will handle is 38 inches
Maximum wheel width is 3 inches to 12 inches
Rim diameter inside clamping is 12 to 23 inches
Rim diameter outside clamping (rim's edge) is 10 to 20 inches
Turn table powered by 110 volt electric motor, clamps and bead breaker powered by air
Model TC-530 Automotive Rim Clamp Style Tire Changer - Click the link below for current price and availability
Options - Model TC-530
Model TC-MC-A: Set of 4 tall clamps (motorcycle or atv) for the model TC-530 tire changer, wt. is approximately 4 lbs. - Click the link below for current price and availability
Model TC-950 Semi-Automatic Heavy-Duty Tire Changer
Swing arm design, handles tires to 47 inches in diameter and rim widths to 15 inches
Bead seating inflation jets are integrated into the clamping jaws and insuring quick and safe inflation
Twin clamping cylinders provide more power to hold the most difficult rims
Conveniently located and powerful bead breaker
No scratching, machine never contacts rim, eliminating accidental damage
Large diameter hex mount/demount shaft for extra rigidity
Pressure limiter, water separator, and oiler are standard
This model has power to spare and a 26 inch x 26 inch square turntable that can handle wheel diameters up to 47 inches with ease
Maximum wheel diameter is 47 inches, maximum wheel width machine can handle is 3 inches to 15 inches
Rim diameter range for inside clamping is 15 to 28 inches, rim diameter range for outside clamping (clamping on the rim edge) is 13 to 24 inches
Power supply required is 110 volt for turntable's 1 1/2 hp electric motor, bead breaker and table clamps are powered by air
Model TC-950: Heavy-Duty Automotive Tire Changer - Click the link below for current price and availability
Model TC-950WPA High Performance, Automatic Tire Changer With Press Arm
Swing arm design handles tires to 47 inches in diameter and rim widths to 15 inches
This model has power to spare and a 26 inch x 26 inch square turntable that can handle wheel diameters up to 47 inches with ease
Four pneumatic clamps and double acting cylinders
Side mounted bead breaker
Press arm for low profile tires
Bead seating inflation jets incorporated into the clamping jaws
No scratching, machine never contacts the rim
Machine includes lubricator, separator, and air pressure regulator
Maximum wheel width machine can handle is 3 inches to 15 inches, maximum rim diameter that can be clamped on inside of rim 15 to 28 inches, maximum rim diameter that can be clamped on outside of rim (edge of rim), 13 to 24 inches
Turn table is powered by a 1.5 hp electric motor, 110 volts
Bead breakers and wheel clamps are powered by air
Model TC-950WPA: High Performance Automatic, Automotive Tire Changer With Press Arm - Click the link below for current price and availability
Model TC-960 High Performance Fully-Automatic Tire Changer With Press Arm And Rollers
Large square turntable
Tilting column and pneumatic locking system
Bead seating inflation jets are integrated in the clamping jaws for quick and safe inflation
Twin clamping cylinders provide more power to hold the most difficult rims
Conveniently located powerful bead breaker
No scratching - machine never contacts the rim
Large diameter hex mount/demount shaft for extra rigidity
Pressure regulator, oiler and water separator standard
External clamping range (clamp to edge of rim) is 13 to 24 inches, internal clamping range is 15 to 28 inches
Maximum wheel diameter allowed is 47 1/2 inches
Wheel width is 3 inches to 15 inches
Unit is air powered, requires an operating pressure from your compressor/air line of 110 to 147 psi
Model TC-960: Fully-Automatic High Performance Tire Changer With Press Arm And Rollers- Click the link below for current price and availability
Model TC-980MR is a heavy-duty tire changer designed to handle the mounting and demounting of low profile and run-flat tires
Tilting column and pneumatic locking system
Bead seating inflation jets are integrated in the clamping jaws insuring quick and safe inflation
Twin clamping cylinders provide more power to hold the most difficult rims
Conveniently located and powerful air powered bead breaker
No scratching, machine never contacts rim, eliminating accidental damage
Large diameter hex mount/demount shaft for extra rigidity
Pressure limiter, water separator and oiler are standard
Handles tires up to 47 1/4 inches rim diameter, and rim width up to 15 inches
Unit has 2 assist arms for "Hands Free" changing of stiff, low-profile tires
Clamping capacities: rim diameter inside is 15 to 28 inches; rim diameter outside is 13 to 24 inches
Turn table is powered by electric motor, 110 volt
Bead Breaker and wheel clamps are powered by air
Model TC-980MR: Heavy-Duty Automotive Tire Changer For Mounting And Demounting Low Profile, And Run-Flat Tires - Click the link below for current price and availability
Model TC-1300 leverless tire changer, protects your expensive rims
Leverless design allows for user safety and convenience
Tilt back column leaves ample room for operation
3 function assist arm adds versatility in dismounting low profile tires
Pneumatic licking hex shaft provides reliable and convenient functionality
Powerful dual bead blaster jets on all four clamps
Inflation hose and air gauge included
Maximum wheel diameter the machine will accomodate is 41 inches, maximum tire width is 3 to 15 inches
You can clamp on rims from 11 to 24 inches when clamping the outside edge of the rim; when clamping on the inside of the rim, you can clamp rims from 13 to 26 inches in diameter
Wheel clamps and bead breaker are powered by air pressure, you will need a compressor with a capacity of from 115 to 145 psi
The turn table is rotated by an electric motor (requires standard 110 volt power outet)
Bead Breaking power is 40,000 psi
Shipping weight is 924 lbs., ships by truck
Model TC-1300: Leverless tire changer for low profile and chrome and aluminum wheels, protects expensive rims - Click the link below for current price and availability
Wikco.Com is an equipment dealer selling directly to the end user
To Order: Click On The Order Form Button Below For Ordering And Payment Information
If Our Index Does not Appear On The Left Side Of This Page Then Click On The Home Button Above To See The Many Other Products We Sell
For Sales or Technical Questions, Parts Information, Or To Check On An Order Please E-Mail us at: wikcocom@msn.com
All information is on our web site at: www.wikco.com
If you have additional questions,
