Hydraulic Powered Woodsplitters

The Hydraulic Powered Wood Splitters are available as either engine powered tow behind models or tractor mounted and tractor hydraulics powered models. Several of the tow behind versions are capable of slitting wood in both the horizontal and vertical position; there are horizontal only models, and either a vertical or horizontal tractor mounted model. The engine powered models use ultra-reliable Honda Engines, and tractor mounted units easily connect to your tractor's auxilliary hydraulic outlets. We have a model to fit your needs whether for home use or commerical use.

• How To Calculate Cycle Time On The Logsplitters



• Formula is: 3.1416 x cylinder rod radius squared x Length of cylinder = Volume measured in Cubic Inches



• Cubic Inches convert to Gallons at 231 cubic inches per one gallon.



• The volume in gallons will be the volume that fills the cylinder on the extension stroke. Dividing the output of either your tractor's hydraulic pump divided by the volume required when extending the cylinder will give you the time for the stroke on extension, and then multiply that by 2 for total cycle time and this will give you a good measurement for cycle time.



• Here is an example for the model 310 on our web page: www.wikco.com/wood.html



• 3.1416 x 4 inch cylinder rod diameter divided by 2 = 2 and then squared = 4 x length of cylinder (24 inches) = 301.44 cubic inches



• 301.44 cubic inches divided by 231 cubic inches = 1.3 gallons volume in cylinder



• Now lets use the minimum 10 gallons per minute required to efficiently operate this unit - so 1.3 gallons of volume on the cylinder extension stroke divided by 10 gallons per minute pumping capacity = .13 minutes, 60 seconds per minute x .13 = 7.8 seconds for the extension stroke at that volume, multiply x 2 = 15.6 seconds total cycle time, this will give you a good estimate to compare different models by.



• The last variable is pressure. On the logsplitters we also give the pressure required from the pump as well. If your pump also meets the minimum pressure requirement, then this estimate will be accurate.



• An increase in gallons per minute will decrease cycle time, a decrease in gpm will increase cycle time, and again you want to be above the minimum recommended shown for each model



• If your hydraulic capacity doesnot meet the minimum we show then you need to look at a different model of splitter from our list to match to your tractor, or consider an engine powered model.







• Features/Specifications - Trailer Mounted Models 500 Series






• Please Note: Models with 48 inch long cylinders are considered special order and will require 3 weeks before shipment, other models are usually in stock.



• To split the log you must hold the lever on the control valve down; at the end of the cycle you can push the lever forward into the auto-return detent position where you can let go of the control lever. The cylinder will automatically retract and then stop in the starting position. While the cylinder is returning you can be loading another log into the splitter.




• Model WX510: Horizontal model, 4 inch x 24 inch splitting cylinder, 18 ton capacity, powered by 5 hp Honda GC series engine, auto-return valve, has off-road low speed tires, with clevis hitch, wt. is 299 lbs. - Click the link below to get a price quote






• Model WX515: Horizontal model, 4 inch x 24 inch splitting cylinder, 20 ton capacity, powered by a 5 hp Honda GC160 engine, auto-return valve, designed for use off-road (does not have lights), has 2 inch ball hitch, wt. is 360 lbs. - Click the link below to get a price quote





• Model WX515L: Same as above except comes with light kit so it can be highway licensed - Click the link below to get a price quote





• Model WX515T: Same as standard model WX515 (does not have lights) except has bed height raised 6 inches, wt. is 367 lbs. - Click the link below to get a price quote






• Model WX520: Horizontal model, 4 inch x 24 inch splitting cylinder, 20 ton capacity, powered by 5.5 hp Honda GX series engine, auto-return valve, has highway tires, 1 7/8 ball hitch, wt. is 365 lbs. - Click the link below to get a price quote





• Model WX520-L: Same as above except comes with light kit so it can be highway licensed, wt. is 368 lbs. - Click the link below to get a price quote






• Model WX520T: Same as standard model WX520 (does not have lights) except with the bed height raised 6 inches, wt. is 375 lbs. - Click the link below to get a price quote






• Model WX530: Pivoting Horizontal/Vertical models, 4 inch x 24 inch splitting cylinder, 20 ton capacity, powered by 5 hp Honda GC series engine, with auto-return valve, has off-road tires, with 1 7/8 ball hitch, wt. is 470 lbs. - Click the link below to get a price quote





• Model WX530-L: Same as above except includes light kit so can be towed on the highway, wt. is 473 lbs. - Click the link below to get a price quote






• Model WX540: Pivoting Horizontal/Vertical models, 4 inch x 24 inch splitting cylinder, 20 ton capacity, powered by a 5.5 hp Honda GX series engine, with auto-return valve, highway tires, with 1 7/8 inch ball hitch, wt. is 470 lbs. - Click the link below to get a price quote





• Model WX540-L: Same model as above except with the addition of light kit so it can be highway towed, wt. is 473 lbs. - Click the link below to get a price quote





• 600 Series Engine Powered Tow Behind Vertical And Horizontal Models




• Model WX615SU: Engine powered tow behind horizontal model with self-contained hydraulic system, powered by a 6 hp Subaru SP170 engine, has 25 ton splitting capacity, uses 4.5 inch diameter x 24 inch long cylinder (24 inch long log capacity), has auto return valve, trailer has 2 inch ball hitch, wt. is 475 lbs. - Click the link below to get a price quote





• Model WX615SU-T: Same as above except has a 6 inch taller log bed height, wt. is 482 lbs. - Click the link below to get a price quote






• Model WX620: Horizontal trailer mounted logsplitter, trailer is designed for off-road towing (See L Model Below For Unit With Light Kit), trailer has 2 inch ball hitch, has 25 ton splitting capacity, self-contained hydraulic system powered by 6.5 HP Honda GX200 Series gas engine, has 4.5 inch diameter by 24 inch cylinder (24 inch log length capacity), auto-return valve, wt. is 480 lbs. - Click the link below to get a price quote






• Model WX620T: Same as above (off-road trailer model) except as 6 inch higher raised bed height, wt. is 488 lbs. - Click the link below to get a price quote





• Model WX620L: Same as standard WX620 model except has lights so can be licensed and highway towed, wt. is 491 lbs. - Click the link below to get a price quote






• Model WX630SU: Trailer mounted convertible type vertical/horizontal logsplitters mounted on highway towable trailer (requries L model with lights to be highway legal), trailer has 2 inch ball hitch, splitter uses self-contained hydraulic system powered by 6 hp Subaru SP170 series engine, splitter uses a 4.5 inch diameter cylinder 24 inches long, splitter has auto-return valve, wt. is 525 lbs. - Click the link below to get a price quote





• Model WX630SU-L: Same as above except has the light kit so you can license unit and tow unit over the road, wt. is 528 lbs. - Click the link below to get a price quote






• Model WX640: Trailer mounted convertible type vertical/horizontal logsplitters mounted on highway towable trailer (requires L model with lights to be highway legal), trailer has 2 inch ball hitch, splitter uses self-contained hydraulic system powered by a 6.5 hp Honda GX200 series engine, splitter uses a 4.5 inch diameter cylinder 24 inches long (24 inch maximum log length in tray), has auto-return valve, has 25 ton splitting capacity, wt. is 520 lbs. - Click the link below to get a price quote





• Model WX640-L: Same as above model except comes with light kit so splitter can be licensed and towed on the highway, wt. is 533 lbs. - Click the link below to get a price quote










• Model WX910: Trailered horizontal logsplitter, 4.5 inch x 24 inch splitting cylinder, 25 ton capacity, powered by a 9 hp Honda engine, has auto-return hydraulic valve, with highway tires, 1 7/8 inch ball hitch, does NOT have light kit, wt. is 510 lbs. - Click the link below to get a price quote





• Model WX910-L: Same as above, but has light kit for highway/street towing, wt. is 547 lbs. - Click the link below to get a price quote






• Model WX910T: Similar to model WX910 (does not have lights), but has bed height raised 6 inches, wt. is 547 lbs. - Click the link below to get a price quote






• Model WX920: Trailered horizontal logsplitter, 4.5 inch x 36 inch splitting cylinder, 25 ton splitting capacity, powered by a 9 hp Honda engine, has auto-return hydraulic valve, with highway tires, 1 7/8 inch ball hitch, wt. is 729 lbs. - Click the link below to get a price quote






• Model WX930: Trailered horizontal logsplitter, 4.5 inch x 48 inch splitting cylinder, 25 ton splitting capacity, powered by a 9 hp Honda engine, has auto-return hydraulic valve, with highway tires, 1 7/8 inch ball hitch, wt. is 890 lbs. - Click the link below to get a price quote





• Models WX950, WX960, And WX970 Have Log Lift Cradle




• Model WX950: Horizontal logsplitter mounted on 3 tire cart for off-road use only, has clevis hitch, has hydraulic loglift, 4.5 inch x 24 inch splitting cylinder with 25 tons of splitting force, powered by 9 hp Honda GX series engine, wt. is 790 lbs. - Click the link below to get a price quote






• Model WX960: Horizontal logsplitter mounted on 3 tire cart for off-road use only, has clevis hitch, has hydraulic loglift, 4.5 inch x 36 inch splitting cylinder with 25 tons of splitting force, powered by 9 hp Honda GX series engine, wt. is 920 lbs. - Click the link below to get a price quote






• Model WX970: Horizontal logsplitter mounted on 3 tire cart for off-road use only, has clevis hitch, has hydraulic loglift, 4.5 inch x 48 inch splitting cylinder with 25 tons of splitting force, powered by 9 hp Honda GX series engine, wt. is 1060 lbs. - Click the link below to get a price quote






• Model WX980: Trailered horizontal/vertical logsplitter, 5 inch x 24 inch cylinder, 31 ton splitting capacity, powered by a 9 hp Honda engine, has auto-return hydraulic valve, with highway tires, 1 7/8 inch ball hitch, wt. is 635 lbs. - Click the link to get a price quote





• Model WX980-L: Same as above except it also has light kit to make highway legal, wt. is 638 lbs. - Click the link below to get a price quote










• Model WX1320: Horiztontal cart mounted logsplitter, for off-road use, has 1 7/8 inch ball type hitch, has 4 way wedge with log tray to hold the log you are splitting, horizontal wedge has hydraulically adjusted height, splitting cylinder is 4.5 inch x 24 inch unit with 25 tons of splitting force, powered by 13 hp Honda GX series engine, off road cart has 2 inch ball hitch on cart tongue, elevator loading shelf to lift log onto splitting trough, wt. is 1500 lbs. - Click the link below to get a price quote






Three Point Hitch Mount Logsplitters







• These Units Have Open Center Hydraulic Valves



• Horizontal Models



• Please Note: Models with 48 inch long cylinders are considered special order and will require 4 weeks before shipment, other models are usually in stock.




• Model WX310: Three point hitch mount, category 1 three point hitches, horizontal model, 4 inch x 24 inch hydraulic cylinder with 16 tons of splitting force at 2550 psi, comes with hoses, has auto return hydraulic valve, wt. is 220 lbs. - Click the link below to get a price quote





• Model WX310C: Same as above except for tractor hydraulic systems with closed center hydraulic valves, wt. 225 lbs. - Click the link below to get a price quote






• Model WX320: Three point hitch mount, category 1 three point hitches, horizontal model, 4.5 inch x 36 inch hydraulic cylinder with 20 tons of splitting force at 2550 psi, comes with hoses, has auto return hydraulic valve, wt. is 540 lbs. - Click the link below to get a price quote





• Model WX320C: Same as above except for tractor hydraulic systems with closed center hydraulic valves - Click the link below to get a price quote






• Model WX330: Three point hitch mount, category 1 three point hitches, horizontal model, 4.5 inch x 48 inch hydraulic cylinder with 20 tons of splitting force at 2550 psi, comes with hoses, has auto return hydraulic valve, wt. is 650 lbs. - Click the link below to get a price quote





• Model WX330C: Same as above except for tractor hydraulic systems with closed center hydraulic valves - Click the link below to get a price quote





• Vertical Models




• Model WX350: Three point hitch mount, category 1 three point hitches, vertical model, 4 inch x 24 inch hydraulic cylinder with 16 tons of splitting force at 2550 psi, comes with hoses, has auto return hydraulic valve, wt. is 220 lbs. - Click the link below to get a price quote





• Model WX350C: Same as above except for tractor hydraulic systems with closed center hydraulic valves - Click the link below to get a price quote






• Model WX360: Three point hitch mount, category 1 three point hitches, vertical model, 5 inch x 24 inch hydraulic cylinder with 25 tons of splitting force at 2550 psi, comes with hoses, has auto return hydraulic valve, wt. is 320 lbs. - Click the link below to get a price quote





• Model WX360C: Three point hitch mount, category 1 three point hitches, vertical model, 5 inch x 24 inch hydraulic cylinder with 25 tons of splitting force at 2550 psi, comes with hoses, has auto return hydraulic valve, with closed center valve, wt. is 320 lbs. - Click the link below to get a price quote






• Model WX370: Three point hitch mount, category 1 three point hitches, pivoting horizontal/vertical model, 4 inch x 24 inch hydraulic cylinder with 16 tons of splitting force at 2550 psi, comes with hoses, has auto return hydraulic valve, wt. is 350 lbs. - Click the link below for a price quote





• Model WX370C: Three point hitch mount, category 1 three point hitches, pivoting horizontal/vertical model, 4 inch x 24 inch hydraulic cylinder with 16 tons of splitting force at 2550 psi, comes with hoses, has auto return hydraulic valve, for closed center hydraulic systems, wt. is 290 lbs. - Click the link below to get a price quote






Skid Steer Mount Models





• Model WX410: Inverted horizontal model, log lays on the ground underneath the main beam of the splitter, has 4 inch x 24 inch hydraulic cylinder with 20 tons of splitting force at 3000 psi, inverted model to lift/split/stack the logs, controlled completely from cab with your auxilliary valve controls, with skidsteer quicktach plate, wt. is 339 lbs. - Click the link below to get a price quote






• Model WX430: Inverted horizontal model, log lays on ground underneath the main beam of the splitter, has 4.5 inch x 36 inch hydraulic cylinder with 25 tons of splitting force at 3000 psi, inverted model to lift/split/stack the logs, controlled completely from cab with your auxilliary valve controls, wt. is 585 lbs. - Click the link below to get a price quote






• Model WX440: Horizontal model, has 4 inch x 24 inch hydraulic cylinder with 20 tons of splitting force at 3000 psi, with auto-return valve with joystick control, wt. is 270 lbs. - Click the link below to get a price quote






• Model WX450: Horizontal model, has 4.5 inch x 36 inch hydraulic cylinder with 25 tons of splitting force at 3000 psi, with auto-return valve with joystick control, wt. is 330 lbs. - Click the link below to get a price quote






• Model WX460: Horizontal model, has 5 inch x 24 inch hydraulic cylinder with 31 tons of splitting force at 3000 psi, with auto-return valve with joystick control, wt. is 345 lbs. - Click the link below to get a price quote






• Model WX470: Pivoting horizontal/vertical model, has 4 inch x 24 inch hydraulic cylinder with 20 tons of splitting force at 3000 psi, with auto-return valve with joystick control, wt. is 398 lbs. - Click the link below to get a price quote





• Other Accessories






• Model W4110: Optional 4-way wedge to fit models WX310, WX520, - Click the link below to get a price quote





• Model W4120: Optional 4-way wedge to fit models WX350, WX370, WX530, WX540, WX440, WX470 - Click the link below to get a price quote





• Model W4130: Optional 4-way wedge to fit models WX320, WX330, WX360, WX450, WX460, WX920, WX930, WX950, WX960, WX970, WX980 - Click the link below to get a price quote





• Model W4140: Optional 4-way wedge lets you split logs into quarter sections, fits down over the standard wedge and fits model - WX910 - Click the link below to get a price quote





• Warranty On All Models: 1 year on parts, pre-approved labor only, with limitations



Click Here To Expand This To A Full Page Version



Wikco.Com is an equipment dealer selling directly to the end user
To Order: Click On The Order Form Button Directly Below For Ordering And Payment Information






If Our Index Doesnot Appear On The Left Side Of This Page
Then Click On The Home Button Above To See The Many Other Products We Sell


For Sales or Technical Questions, Parts Information, Or To Check On An Order
Please E-Mail us at: wikcocom@msn.com
All information is on our web site at: www.wikco.com
If you have additional questions,

Click Here For Our Contact Information




Wikco.com Inc.


Copyright © Wikco.Com Inc., 1997 to present - All Rights Reserved, A U.S. Corporation